Features a sealed diaphragm design that eliminates the need for grease and prevents melt contamination and gauge plugging, the Mechanical Pressure Gauge comes with a range of 0 to 10,000 psi. Polymer pressure is sensed by a metal diaphragm, mounted flush with the inside surface of the extruder barrel with pressure indicated on the readout gauge. It also features a rigid snout that has a mechanical gauge that can be rotated 300° for unobstructed viewing.
Features a sealed diaphragm design that eliminates the need for grease and prevents melt contamination and gauge plugging, the Mechanical Pressure Gauge comes with a range of 0 to 10,000 psi. Polymer pressure is sensed by a metal diaphragm, mounted flush with the inside surface of the extruder barrel with pressure indicated on the readout gauge. It also features a rigid snout that has a mechanical gauge that can be rotated 300° for unobstructed viewing.
The mechanical pressure gauge comes with a stainless steel construction.
Features
Applications
| Configuration | Rigid snout |
| Pressure Range | 0 to 10,000 psi |
| Snout Length | 6" |
| Combined Error | +/- 2% FS |
| Zero Adjustability | 7.5% FS |
| Maximum Pressure | 1.5 X FS |
| Needle Sweep | 270° |
| Thermocouple | Type J (Standard) |
| Max Diaphragm Temperature | 750°F (400°C) |
| Maximum Case Temperature | 275°F (135°C) |
| Mounting Torque | 500 inch/lbs. maximum |
| Weight | 2-3 lbs. depending on configuration |
| Standard Wetted Parts | TiN coated 15-5 PH SST |
| Configuration | Rigid snout |
| Pressure Range | 0 to 10,000 psi |
| Snout Length | 6" |
| Combined Error | +/- 2% FS |
| Zero Adjustability | 7.5% FS |
| Maximum Pressure | 1.5 X FS |
| Needle Sweep | 270° |
| Thermocouple | Type J (Standard) |
| Max Diaphragm Temperature | 750°F (400°C) |
| Maximum Case Temperature | 275°F (135°C) |
| Mounting Torque | 500 inch/lbs. maximum |
| Weight | 2-3 lbs. depending on configuration |
| Standard Wetted Parts | TiN coated 15-5 PH SST |
