For use with general-purpose melt pressure measurements, this melt pressure sensor works with DCS and PLCs and provides the industry standard 0 to 10 Vdc amplified signal. Come with a snout length of 6" (15 cm).
For use with general-purpose melt pressure measurements, this melt pressure sensor works with DCS and PLCs and provides the industry standard 0 to 10 Vdc amplified signal. Come with a snout length of 6" (15 cm).
General purpose melt pressure transducer provides the industry standard 3.33 mV/V signal compatible with most pressure indicators. Designed to be widely acceptable by OEMs and users anywhere in the world.
Caractéristiques
Caractéristiques
| Pressure Range | 0 to 5000 psi |
| Output | 0 to 10 vdc |
| Input Voltage | 16 to 36 vdc |
| Repeatability | ±0.2%FSO |
| Snout Length | 6" (15 cm) |
| Stem Length | 18" (46 cm) flex |
| Configuration | Four-arm bonded foil wheatstone bridge strain gage |
| Load Resistance | 2000 ohms minimum |
| Over Pressure | 2 X FSO or 35,000 psi (whichever is less) |
| Span Adjustment Range | ±15% |
| Maximum Diaphragm Temperature | 750°F (400°C) |
| Pressure Range | 0 to 5000 psi |
| Output | 0 to 10 vdc |
| Input Voltage | 16 to 36 vdc |
| Repeatability | ±0.2%FSO |
| Snout Length | 6" (15 cm) |
| Stem Length | 18" (46 cm) flex |
| Configuration | Four-arm bonded foil wheatstone bridge strain gage |
| Load Resistance | 2000 ohms minimum |
| Over Pressure | 2 X FSO or 35,000 psi (whichever is less) |
| Span Adjustment Range | ±15% |
| Maximum Diaphragm Temperature | 750°F (400°C) |
