The flow switch lets you know when the flow rate is above or below your set point. It has a 6' (1.8 m) cable with cable gland and a 0.5" (12.7 mm) female NPT connection.
The flow switch lets you know when the flow rate is above or below your set point. It has a 6' (1.8 m) cable with cable gland and a 0.5" (12.7 mm) female NPT connection.
Monitor flow rate with help from the Dwyer TDFS2-1-P-06 Series TDFS2 Thermal Dispersion Flow Switch. LED status indicators let you know whether the rate of flow is above or below your set point. The 6' (1.8 m) cable, 0.5" (12.7 mm) female NPT connection and NO/NC NPN outputs help make installation simple.
Features
| Power Source | Electric |
| Power Requirements | 9 to 24 VDC |
| Switch Type | Thermal dispersion |
| Temperature Limit | Ambient: 5 to 140°F (-15 to 60°C); Process: 5 to 140°F (-15 to 60°C) |
| Pressure Limit | 300 psig (20.67 bar) |
| Connector Type(s) | 0.5" (12.7 mm) female NPT, NO/NC NPN outputs |
| Power Source | Electric |
| Power Requirements | 9 to 24 VDC |
| Switch Type | Thermal dispersion |
| Temperature Limit | Ambient: 5 to 140°F (-15 to 60°C); Process: 5 to 140°F (-15 to 60°C) |
| Pressure Limit | 300 psig (20.67 bar) |
| Connector Type(s) | 0.5" (12.7 mm) female NPT, NO/NC NPN outputs |
