Check calibration of gages, switches, transmitters, and recorders by sourcing pressure and vacuum. The cushion handles provides comfort while preventing the pump from sliding. Dual o-rings on all pistons ensure zero leakage and the oversized check valve provides smooth operation throughout the output range. Includes a Hose Kit.
Check calibration of gages, switches, transmitters, and recorders by sourcing pressure and vacuum. The cushion handles provides comfort while preventing the pump from sliding. Dual o-rings on all pistons ensure zero leakage and the oversized check valve provides smooth operation throughout the output range. Includes a Hose Kit.
The pump is equipped with 1/8" and 1/4" BSP ports. In order to use NPT fittings, a NPT to BSP Parallel Thread Adapter is required. These adapters, which are included with the pump, have a bonded washer attached to the male end of the adapter.
The pump uses a Schrader valve instead of a needle valve. Thus, full open or closed is several turns from the end of the travel. Over-tightening does not increase the seal.
Caractéristiques
Applications
| Media | Air and compatible gases only |
| Output Ranges | -28" Hg to 600 psi (-0.945 to 40 bar) |
| Process Connection | 1/4" NPT/BSP |
| Gauge Connection | 1/8" NPT/BSP |
| Materials | Stainless steel fittings, anodized aluminum housing, plastic/rubber handles, and nitrile o-rings |
| Weight | 2 lbs (0.91 kg) |
Cliquer sur une catégorie pour voir une sélection d'accessoires compatible avec le Dwyer PCHP-1K Pneumatic Calibration Hand Pump with Hose Kit, 600PSI.
| Media | Air and compatible gases only |
| Output Ranges | -28" Hg to 600 psi (-0.945 to 40 bar) |
| Process Connection | 1/4" NPT/BSP |
| Gauge Connection | 1/8" NPT/BSP |
| Materials | Stainless steel fittings, anodized aluminum housing, plastic/rubber handles, and nitrile o-rings |
| Weight | 2 lbs (0.91 kg) |
Cliquer sur une catégorie pour voir une sélection d'accessoires compatible avec le Dwyer PCHP-1K Pneumatic Calibration Hand Pump with Hose Kit, 600PSI.
