Using a ring magnet on the outside of the case, this monitor easily displays the airflow rate on your facility's line. The 0.25in (6.35mm) female NPT connection simplifies installation.
Using a ring magnet on the outside of the case, this monitor easily displays the airflow rate on your facility's line. The 0.25in (6.35mm) female NPT connection simplifies installation.
Discontinué!
Ce produit a été discontinué et n’est plus disponible. Il n’y a pas de produit de remplacement direct. Ne vous inquiétez pas, nous avons quelques options pour vous aider à trouver ce dont vous avez besoin:
Visitez notre catégorie Débitmètres à section variable pour trouver des produits similaires.
Ou nous ferons une recherche et vous aiderons à trouver ce dont vous avez besoin:
With this Dwyer HFA-1-22 In-Line Flow Monitor on your air line, you can easily check the rate of airflow. The monitor is ideal for setting up pressure-relief valves, while the 0.25" (6.35 mm) female NPT connection allows easy connection to your existing line.
Caractéristiques
Applications
| Connection Size | 0.25" (6.35 mm) female NPT |
| Air SCFM Range | 4 to 23 |
| Maximum Pressure Drop PSID | 3.61 |
| Wetted Materials | Aluminum (casing), Buna-N (seals), PTFE (magnet), stainless steel (disk) |
| Maximum Viscosity | 500 SSU |
| Temperature Limits | 240°F (116°C) |
| Pressure Limits | 600 psig (41 bar) |
| Accuracy | ±4% of full scale over the entire range, ±2.5% over center third of the measuring range |
| Repeatability | ±1% of full scale |
| Connection Size | 0.25" (6.35 mm) female NPT |
| Air SCFM Range | 4 to 23 |
| Maximum Pressure Drop PSID | 3.61 |
| Wetted Materials | Aluminum (casing), Buna-N (seals), PTFE (magnet), stainless steel (disk) |
| Maximum Viscosity | 500 SSU |
| Temperature Limits | 240°F (116°C) |
| Pressure Limits | 600 psig (41 bar) |
| Accuracy | ±4% of full scale over the entire range, ±2.5% over center third of the measuring range |
| Repeatability | ±1% of full scale |
