For fiberglass, wood, brass, cast iron, plastic, epoxy, rubber, and laminates, this 5⁄16" cone-shaped carving bit is designed to remove material. In addition, this bit is ideal for shaping, carving, engraving, free-hand routing, grooving, slotting, inlaying, making tapered holes, and hollowing.
For fiberglass, wood, brass, cast iron, plastic, epoxy, rubber, and laminates, this 5⁄16" cone-shaped carving bit is designed to remove material. In addition, this bit is ideal for shaping, carving, engraving, free-hand routing, grooving, slotting, inlaying, making tapered holes, and hollowing.
Discontinué!
Ce produit a été discontinué et n’est plus disponible.
Il n’y a pas de remplacement direct, mais nous vous recommandons:
Vous ne trouvez pas ce que vous cherchez? Nous ferons une recherche et vous aiderons à trouver ce dont vous avez besoin.
Work with this bit that can make cuts in narrow and deep areas with its tapered shape. Additionally, the tip of this bit makes v-bottom slots, grooves, and flat/tapered side cuts.
Features
Applications
| Bit Diameter | 5⁄16" (8.13 mm) |
| Maximum Operating RPM | Do not run in excess of 35,000 rpm |
| Color Code | Teal |
| Overall Length | 1.5" (38.1 mm) |
| Material | Tungsten carbide |
| Shank Diameter | 0.125" (3.17 mm) |
| Bit Diameter | 5⁄16" (8.13 mm) |
| Maximum Operating RPM | Do not run in excess of 35,000 rpm |
| Color Code | Teal |
| Overall Length | 1.5" (38.1 mm) |
| Material | Tungsten carbide |
| Shank Diameter | 0.125" (3.17 mm) |
