Energy & Power Measurement Solutions
Using split-core current transformers, you can directly proportion your output voltage to your input current.
Using split-core current transformers, you can directly proportion your output voltage to your input current.
Split-core current transformers provide linear output voltage that is directly proportional to the input current. These transformers are safely and easily installed over existing electrical power lines without disconnecting the lines or interrupting service.
DENT’s energy monitoring components are used for a variety of applications including building automation, tenant submetering, performance verification, energy management, and new technology assessment.
| Window Size | 1" (25mm) |
| Current Range | 200A: 2 - 240A AC |
| Output | 333.3 mV at rated current |
| Ratio Error* | <0.5% at rated current (typical) |
| Phase Error* | <0.5° at rated current (typical) |
| Output Impedance (typ) | 60 ohms |
| Wire Polarity | White = Hi, positive (+) | Black = Low, negative (-) |
| Frequency Range | 50/60 Hz |
| Case Material | White Nylon, UL 94v0 |
| Leads | 3 M (9.8'), twisted pair, 24 AWG |
| Operating Temperature | –40° to 55°C (-40° to 131°F) |
| Working Voltage | 600 VAC, Category III |
| Certification | UL 2808 | CAN/CSA STD C22.2 | No. 61010-1-12 |
| Window Size | 1" (25mm) |
| Current Range | 200A: 2 - 240A AC |
| Output | 333.3 mV at rated current |
| Ratio Error* | <0.5% at rated current (typical) |
| Phase Error* | <0.5° at rated current (typical) |
| Output Impedance (typ) | 60 ohms |
| Wire Polarity | White = Hi, positive (+) | Black = Low, negative (-) |
| Frequency Range | 50/60 Hz |
| Case Material | White Nylon, UL 94v0 |
| Leads | 3 M (9.8'), twisted pair, 24 AWG |
| Operating Temperature | –40° to 55°C (-40° to 131°F) |
| Working Voltage | 600 VAC, Category III |
| Certification | UL 2808 | CAN/CSA STD C22.2 | No. 61010-1-12 |
