Delmhorst FX-20/P03 offre

Monitoring the moisture content (%MC) in hay is critical for maintaining its quality and preventing losses due to spoilage or degradation. Too much moisture can lead to mold growth and potential combustion, while too little can result in dry, brittle hay that is less nutritious and palatable for livestock.

An essential tool for farmers and feed producers who aim to maintain high-quality hay, the FX-20 measures across a range of %MC levels with a selection of interchangeable probes, ensuring comprehensive monitoring throughout the entire hay production process. Built for longevity, the FX-20 is designed to endure the demanding conditions of farming. The case assembly and probes are robust enough to withstand the inevitable bumps and knocks typical in busy farming environments.

Caractéristiques

• Short pin prod (831 requires H-4 handle (also included) to attach to meter) is designed specifically for testing hay in the windrow
• In 'continuous' mode, the meter takes two readings every second and displays both the average and the highest of eight accumulated measurements
• In 'portable' mode, the device can average up to 100 readings, showing both the average and highest of the collected data set
• On-screen readings statistics: High, Low, Average, Standard Deviation, Last 10
• Large, custom display with auto backlight is easy to read under all conditions
• Detects a hay moisture range of 6 to 40% MC
• Users can set a particular moisture level, an audible and adjustable alarm will sound when the desired %MC is detected
• Auto timer can be set to go off at the 1 m, 4 m, or 10 m mark
• Internal calibration check
• Audio "Low Batt" warning
• Ergonomic design maximizes user comfort while also enhancing meter performance and ease of use
• Accommodates existing Delmhorst hay products and accessories

Applications

Harvesting

• Optimal Cutting Time: Determine the best time to cut hay to ensure it has the appropriate moisture content.
• Field Moisture Checks: Conduct spot checks in the field to monitor moisture levels before and during the harvesting process to optimize the quality of the hay.

Baling

• Pre-Baling Checks: Measure moisture content before baling to prevent the risk of mold growth and spontaneous combustion in the bales.
• During Baling: Continuously monitor moisture levels as hay is being baled to maintain consistent quality.

Storage

• Initial Storage Checks: Measure the moisture content of bales as they are placed into storage to prevent spoilage and preserve feed quality.
• Ongoing Monitoring: Regularly check moisture levels in stored hay to detect any changes that could indicate problems such as moisture ingress or heating.

Transportation

• Pre-Transport Checks: Helps in complying with buyer requirements of moisture specifications and maintaining the quality during transit.
• Loading Inspections: Conduct moisture checks during the loading process to confirm that all bales being shipped are within the acceptable moisture range.

Quality Control

• Batch Testing: Perform batch testing of hay bales to assess the overall moisture distribution within a batch and to maintain consistent quality across all bales produced.
• Buyer Assurance: Provide buyers with accurate moisture content data to assure them of the hay quality.

Feed Management

• Nutritional Quality: Monitor the moisture content to ensure the nutritional quality of the hay is maintained.
• Risk Mitigation: Reduce the risk of mold growth and spoilage, ensuring that livestock feed remains safe and healthy.