Fièrement québécois

Gestion et propriété 100% de chez nous

évaluation des clients

4.7/5 ÉTOILES

4235 COMMENTAIRES

évaluation des clients

4.7/5 ÉTOILES

4235 COMMENTAIRES

Crowcon TRP-04-XX-Z Triple Plus+ Pumped 2-Gas Detector, Dual IR CH4 %LEL/%Vol/O2

Modèle: TRP-04-XX-Z

Crowcon TRP-04-XX-Z Triple Plus+ Pumped 2-Gas Detector, Dual IR CH4 %LEL/%Vol/O2-

Plus de produits Crowcon

Demander à un expert

Crowcon TRP-04-XX-Z Triple Plus+ Pumped 2-Gas Detector, Dual IR CH4 %LEL/%Vol/O2

Modèle: TRP-04-XX-Z

This multi-gas detector detects 2 toxic gases, including CH4 (% LEL and % volume) and O2, and it comes with an internal pump with an on/off button. The gas detector features LIBRA lithium-ion battery technology and an IR sensor option for flammable hydrocarbons or carbon dioxide measurements.

This multi-gas detector detects 2 toxic gases, including CH4 (% LEL and % volume) and O2, and it comes with an internal pump with an on/off button. The gas detector features LIBRA lithium-ion battery technology and an IR sensor option for flammable hydrocarbons or carbon dioxide measurements.

Discontinué!

Ce produit a été discontinué et n’est plus disponible.
Voici le produit de remplacement direct :

Crowcon Gas-Pro Portable 5 Gas Detector-

Crowcon Gas-Pro Portable 5 Gas Detector

Modèle: GAS-PRO SERIES

A portable detector monitoring up to 5 gases, including H₂S, CO, and oxygen depletion, with a compact design and pre-entry check.

En savoir plus

Accessoires recommandées

Crowcon H2TRP Hydrogen Gas Sensor for Triple Plus+ Multi-Gas Detectors, 0 to 100% LEL-

Crowcon H2TRP Hydrogen Gas Sensor for Triple Plus+ Multi-Gas Detectors, 0 to 100% LEL

H2TRP

Crowcon C2H4TRP Ethylene Gas Sensor for Triple Plus+ Multi-Gas Detectors, 0 to 100% LEL-

Crowcon C2H4TRP Ethylene Gas Sensor for Triple Plus+ Multi-Gas Detectors, 0 to 100% LEL

C2H4TRP

Crowcon C4H10TRP Butane Gas Sensor for Triple Plus+ Multi-Gas Detectors, 0 to 100% LEL-

Crowcon C4H10TRP Butane Gas Sensor for Triple Plus+ Multi-Gas Detectors, 0 to 100% LEL

C4H10TRP

Crowcon C5H12TRP Pentane Gas Sensor for Triple Plus+ Multi-Gas Detectors, 0 to 100% LEL-

Crowcon C5H12TRP Pentane Gas Sensor for Triple Plus+ Multi-Gas Detectors, 0 to 100% LEL

C5H12TRP

Crowcon C3H8TRP Propane Gas Sensor for Triple Plus+ Multi-Gas Detectors, 0 to 100% LEL-

Crowcon C3H8TRP Propane Gas Sensor for Triple Plus+ Multi-Gas Detectors, 0 to 100% LEL

C3H8TRP

Crowcon CH4TRP Methane Gas Sensor for Triple Plus+ Gas Detectors, 0 to 100% LEL -

Crowcon CH4TRP Methane Gas Sensor for Triple Plus+ Gas Detectors, 0 to 100% LEL

CH4TRP

Crowcon TRP-04-XX-Z offre

Intrinsically safe, the Triple Plus+ provides enhanced facilities for safety and detector fleet managers, including a selection of flammable gas correction factors (so 1 unit can be used in several locations across a site) and annotation of the data file with user names and site names selected from pre-configured files in the unit.

Caractéristiques

  • The new IR sensor has no poisoning effects, single or dual range measurement, long life and no burnout, % vol. and % LEL measurement, and IR CO2 detection, 0 to 5%
  • Piercing 85dB alarm at 3.28ft (1m) - gives you confidence in the status of your Triple Plus+, and the environment you're working in
  • Vivid LED alarms with top visibility
  • Confidence blip, low battery and TWA warnings
  • Timed data logging with 100-hour capacity
  • Wide range of electrochemical oxygen and toxic gas sensors - allows you to create your optimum 4 gas Triple Plus+
  • Available for diffusion, manual aspiration or pumped sampling
  • Interchangeable sensor modules
  • Comprehensive data logging with site and user names
  • Triax™ casing will not crack or shatter when dropped - system integrity and operation assured
  • Unique internal design will resist the harshest treatment
  • Full buoyancy - makes recovery from water possible
  • Simple Windows Software interface - user menus allow calibration with or without connecting to a PC
  • QuickCal for rapid calibration

Le Crowcon TRP-04-XX-Z comprend

  • Multigas Detector
  • Shoulder Strap
  • Allen Keys
  • Flow Plate
  • Hose
  • Pouch
  • Manual

Cliquer sur une catégorie pour voir une sélection d'accessoires compatible avec le Crowcon TRP-04-XX-Z Triple Plus+ Pumped 2-Gas Detector, Dual IR CH4 %LEL/%Vol/O2.

Crowcon C01985 Single Sensor Calibration Adapter for Triple Plus+ and Triple Plus+ IR Multi-Gas Detectors C01985
Use this single-sensor calibration adapter with your existing Triple Plus+ and Triple Plus+ IR multigas detectors.



Crowcon C01439 Australia Charger/Interface II for Triple Plus+ and Triple Plus+ IR Multi-Gas Detectors C01439
Use this charger/interface with your existing Triple Plus+ or Triple Plus+ IR multi-gas detector. The charger is designed to work for the Australian region.



Crowcon C011321 Single-Way Drop-In Charger with Multi-Region Power Supply C011321
Use this single-way, drop-in charger with a multi-region power supply that has UK, EU, US and Australian plug adapters with your existing Triple Plus+ multi-gas detector.



Crowcon C01438 Europe Charger/Interface II for Triple Plus+ and Triple Plus+ IR Multi-Gas Detectors C01438
Use this charger/interface with your existing Triple Plus+ or Triple Plus+ IR multi-gas detector. The charger is designed to work for the European region.



Crowcon C01626 South Africa Charger/Interface II for Triple Plus+ and Triple Plus+ IR Multi-Gas Detectors C01626
Use this charger/interface with your existing Triple Plus+ or Triple Plus+ IR multi-gas detector. The charger is designed to work for the South African region.



Crowcon C01440 International Charger/Interface II Without Plug for Triple Plus+ and Triple Plus+ IR Multi-Gas Detectors C01440
Use this charger/interface with your existing Triple Plus+ or Triple Plus+ IR multi-gas detector.



Crowcon C01437 USA Charger/Interface II for Triple Plus+ and Triple Plus+ IR Multi-Gas Detectors C01437
Use this charger/interface with your existing Triple Plus+ or Triple Plus+ IR multi-gas detector. The charger is designed to work for the USA region.



Crowcon C03580 Multi-Region Power Supply for Gasman, Tetra 3 and Triple Plus+ Multi-Gas Detectors C03580
Use this multi-region power supply with your existing Gasman, Tetra 3 or Triple Plus+ multi-gas detector. The power supply comes with plug adapters for the UK, EU, US and Australia.



Crowcon H2TRPEC Hydrogen Electrochemical Gas Sensor for Triple Plus+ Multi-Gas Detectors, 0 to 4% H2TRPEC
Made to work with your Triple Plus+ multi-gas detector, this gas sensor detects hydrogen electrochemical gas at levels from 0 to 4%.



Crowcon F2TRP Fluorine Gas Sensor for Triple Plus+ Gas Detectors, 0 to 10ppm F2TRP
This fluorine gas sensor works with your Triple Plus+ multi-gas detector and has a measurement range of 0 to 10ppm.



Crowcon HFTRP Hydrogen Fluoride Gas Sensor for Triple Plus+ Multi-Gas Detectors, 0 to 10ppm HFTRP
Made to work with your Triple Plus+ multi-gas detector, this gas sensor detects hydrogen fluoride gas at levels from 0 to 10ppm.



Crowcon ETOTRP Ethylene Oxide Gas Sensor for Triple Plus+ Gas Detectors, 0 to 10ppm ETOTRP
This ethylene oxide gas sensor works with your Triple Plus+ multi-gas detector and has a measurement range of 0 to 10ppm.



Crowcon VOTRP Volatile Organics Gas Sensor for Triple Plus+ Multi-Gas Detectors, 0 to 100ppm VOTRP
Made to work with your Triple Plus+ multi-gas detector, this gas sensor detects volatile organics at levels from 0 to 100ppm.



Crowcon ASH3TRP Arsine Gas Sensor for Triple Plus+ Multi-Gas Detectors, 0 to 1 ppm ASH3TRP
With a range of 0 to 1 ppm, this sensor for your Triple Plus+ multi-gas detector measures levels of arsine.



Crowcon PH3TRP Phosphine Gas Sensor for Triple Plus+ Multi-Gas Detectors, 0 to 2ppm PH3TRP
Made to work with your Triple Plus+ multi-gas detector, this gas sensor detects phosphine gas at levels from 0 to 2ppm.



Crowcon PH3TRPUK Phosphine Gas Sensor for Triple Plus+ Multi-Gas Detectors, 0 to 2ppm, UK Alarms PH3TRPUK
Made to work with your Triple Plus+ multi-gas detector, this gas sensor with UK alarms detects phosphine gas at levels from 0 to 2ppm.



Crowcon CLO2TRP Chlorine Dioxide Gas Sensor for Triple Plus+ Gas Detectors, 0 to 1ppm CLO2TRP
With a 0 to 1ppm measurement range, this chlorine dioxide gas sensor is designed to check for chlorine dioxide levels when used with your compatible Triple Plus+ gas detector.



Crowcon NH3TRP1000 Ammonia Gas Sensor for Triple Plus+ Multi-Gas Detectors, 0 to 1,000ppm NH3TRP1000
Made to work with your Triple Plus+ multi-gas detector, this gas sensor detects ammonia gas at levels from 0 to 1,000ppm.



Crowcon NH3TRP Ammonia Gas Sensor for Triple Plus+ Multi-Gas Detectors, 0 to 50ppm NH3TRP
Made to work with your Triple Plus+ multi-gas detector, this gas sensor detects ammonia gas at levels from 0 to 50ppm.



Crowcon HCNTRP Hydrogen Cyanide Gas Sensor for Triple Plus+ Multi-Gas Detectors, 0 to 25ppm HCNTRP
Made to work with your Triple Plus+ multi-gas detector, this gas sensor detects hydrogen cyanide gas at levels from 0 to 25ppm.



Crowcon COTRP Carbon Monoxide Gas Sensor for Triple Plus+ Gas Detectors, 0 to 500ppm COTRP
With a 0 to 500ppm measurement range, this carbon monoxide gas sensor is designed to check for carbon monoxide levels when used with your compatible Triple Plus+ gas detector.



Crowcon S011371 Oxygen Gas Sensor for Triple Plus+ Multi-Gas Detectors, 0 to 25% S011371
Made to work with your Triple Plus+ multi-gas detector, this gas sensor detects oxygen gas at levels from 0 to 25%.



Crowcon H2TRPDR Single Hydrogen or Dual Range with H2TRP Gas Sensor for Triple Plus+ Multi-Gas Detectors, 0 to 10% Vol H2TRPDR
Made to work with your Triple Plus+ multi-gas detector, this gas sensor detects single hydrogen or a dual range with H2TRP gas at levels from 0 to 10% volume.



Crowcon CH4TRPDRVOL Methane Gas Sensor for Triple Plus+ Gas Detectors, 0 to 100% LEL, % LEL/% Vol. Units CH4TRPDRVOL
With a 0 to 100% LEL measurement range, this methane gas sensor is designed to check for methane levels when used with your compatible Triple Plus+ gas detector. The sensor supports %LEL and %vol units.



Crowcon CH4TRPDRLEL Methane Gas Sensor for Triple Plus+ Gas Detectors, 0 to 100% LEL, % LEL/% Vol. Units CH4TRPDRLEL
With a 0 to 100% LEL measurement range, this methane gas sensor is designed to check for methane levels when used with your compatible Triple Plus+ gas detector. The sensor supports %LEL and %vol units.



Crowcon FLAMTRPAUS Flammable Gas Sensor for Triple Plus+ Gas Detectors, 0 to 100% LEL, AUS Alarms FLAMTRPAUS
This flammable gas sensor features a 0 to 100% LEL range and AUS alarms to keep you notified. The sensor is made to work with your Triple Plus+ multi-gas detector.



Crowcon FLAMTRPUSA Flammable Gas Sensor for Triple Plus+ Gas Detectors, 0 to 100% LEL, USA Alarms FLAMTRPUSA
This flammable gas sensor features a 0 to 100% LEL range and USA alarms to keep you notified. The sensor is made to work with your Triple Plus+ multi-gas detector.



Crowcon H2TRP Hydrogen Gas Sensor for Triple Plus+ Multi-Gas Detectors, 0 to 100% LEL H2TRP
Made to work with your Triple Plus+ multi-gas detector, this gas sensor detects hydrogen gas at levels from 0 to 100% LEL.



Crowcon C2H4TRP Ethylene Gas Sensor for Triple Plus+ Multi-Gas Detectors, 0 to 100% LEL C2H4TRP
Made to work with Triple Plus+ multi-gas detectors, this gas sensor tests for ethylene gas and features a range of 0 to 100% LEL.



Crowcon C4H10TRP Butane Gas Sensor for Triple Plus+ Multi-Gas Detectors, 0 to 100% LEL C4H10TRP
Made to work with Triple Plus+ multi-gas detectors, this gas sensor tests for butane gas and features a range of 0 to 100% LEL.



Crowcon C5H12TRP Pentane Gas Sensor for Triple Plus+ Multi-Gas Detectors, 0 to 100% LEL C5H12TRP
Made to work with Triple Plus+ multi-gas detectors, this gas sensor tests for pentane gas and features a range of 0 to 100% LEL.



Crowcon C3H8TRP Propane Gas Sensor for Triple Plus+ Multi-Gas Detectors, 0 to 100% LEL C3H8TRP
Made to work with Triple Plus+ multi-gas detectors, this gas sensor tests for propane gas and features a range of 0 to 100% LEL.



Crowcon COTRPUSA Carbon Monoxide Gas Sensor for Triple Plus+ Gas Detectors, 0 to 500ppm, US Alarms COTRPUSA
With a 0 to 500ppm measurement range, this carbon monoxide gas sensor is designed to check for carbon monoxide levels when used with your compatible Triple Plus+ gas detector. The sensor features a US alarm.



Crowcon COTRPAUS Carbon Monoxide Gas Sensor for Triple Plus+ Gas Detectors, 0 to 500ppm, AUS Alarm COTRPAUS
With a 0 to 500ppm measurement range, this carbon monoxide gas sensor is designed to check for carbon monoxide levels when used with your compatible Triple Plus+ gas detector. The sensor features an AUS alarm.



Crowcon COTRPCOMP Carbon Monoxide Gas Sensor for Triple Plus+ Gas Detectors, 0 to 500ppm, H2 Compensated COTRPCOMP
With a 0 to 500ppm measurement range, this carbon monoxide (H2 compensated) gas sensor is designed to check for carbon monoxide levels when used with your compatible Triple Plus+ gas detector.



Crowcon HCLTRP Hydrogen Chloride Gas Sensor for Triple Plus+ Multi-Gas Detectors, 0 to 10ppm HCLTRP
Made to work with your Triple Plus+ multi-gas detector, this gas sensor detects hydrogen chloride gas at levels from 0 to 10ppm.



Crowcon CL2TRP Chlorine Gas Sensor for Triple Plus+ Gas Detectors, 0 to 5ppm CL2TRP
With a 0 to 5ppm measurement range, this chlorine gas sensor is designed to check for chlorine levels when used with your compatible Triple Plus+ gas detector.



Crowcon CL2TRPUK Chlorine Gas Sensor for Triple Plus+ Gas Detectors, 0 to 5ppm, UK Alarm CL2TRPUK
With a 0 to 5ppm measurement range, this chlorine gas sensor is designed to check for chlorine levels when used with your compatible Triple Plus+ gas detector. The sensor features a UK alarm.



Crowcon NO2TRP Nitrogen Dioxide Gas Sensor for Triple Plus+ Multi-Gas Detectors, 0 to 10ppm NO2TRP
Made to work with your Triple Plus+ multi-gas detector, this gas sensor detects nitrogen dioxide gas at levels from 0 to 10ppm.



Crowcon NOTRP Nitric Oxide Gas Sensor for Triple Plus+ Multi-Gas Detectors, 0 to 100ppm NOTRP
Made to work with your Triple Plus+ multi-gas detector, this gas sensor detects nitric oxide gas at levels from 0 to 100ppm.



Crowcon H2TRPPPM Hydrogen Gas Sensor for Triple Plus+ Multi-Gas Detectors, 0 to 2,000ppm H2TRPPPM
Made to work with your Triple Plus+ multi-gas detector, this gas sensor detects hydrogen gas at levels from 0 to 2,000ppm.



Crowcon SO2TRP Sulphur Dioxide Gas Sensor with Hydrogen Sulphide Immune for Triple Plus+ Multi-Gas Detectors, 0 to 10ppm SO2TRP
Made to work with your Triple Plus+ multi-gas detector, this gas sensor detects sulphur dioxide gas at levels from 0 to 10ppm.



Crowcon H2STRP1000 Hydrogen Sulphide Gas Sensor for Triple Plus+ Multi-Gas Detectors, 0 to 1,000ppm H2STRP1000
Made to work with your Triple Plus+ multi-gas detector, this gas sensor detects hydrogen sulphide gas at levels from 0 to 1,000ppm.



Crowcon H2STRPAUS Hydrogen Sulphide Gas Sensor for Triple Plus+ Multi-Gas Detectors, 0 to 50ppm, AUS Alarms H2STRPAUS
Made to work with your Triple Plus+ multi-gas detector, this gas sensor detects hydrogen sulphide gas at levels from 0 to 50ppm and has AUS alarms built in.



Crowcon H2STRPUSA Hydrogen Sulphide Gas Sensor for Triple Plus+ Multi-Gas Detectors, 0 to 50ppm, US Alarms H2STRPUSA
Made to work with your Triple Plus+ multi-gas detector, this gas sensor detects hydrogen sulphide gas at levels from 0 to 50ppm and has US alarms built in.



Crowcon H2STRPALM Hydrogen Sulphide Gas Sensor for Triple Plus+ Multi-Gas Detectors, 0 to 50ppm, Almeer (0 to 200ppm) H2STRPALM
Made to work with your Triple Plus+ multi-gas detector, this gas sensor detects hydrogen sulphide gas at levels from 0 to 50ppm.



Crowcon H2STRP Hydrogen Sulphide Gas Sensor for Triple Plus+ Multi-Gas Detectors, 0 to 50ppm H2STRP
Made to work with your Triple Plus+ multi-gas detector, this gas sensor detects hydrogen sulphide gas at levels from 0 to 50ppm.



Crowcon CH4TRP Methane Gas Sensor for Triple Plus+ Gas Detectors, 0 to 100% LEL CH4TRP
With a 0 to 100% LEL measurement range, this methane gas sensor is designed to check for methane levels when used with your compatible Triple Plus+ gas detector.



Crowcon C03141 Drop Line for Triple Plus+ Multi-Gas Detectors, 19.69ft C03141
Undertake pre-entry checks with your existing Triple Plus+ multi-gas detector with help from this 19.69ft (6m) drop line.



Crowcon FIL29001 In-Line Water Trap/Particulate Filter for Triple Plus+ and Triple Plus+ IR Gas Detectors FIL29001
Safeguard your Triple Plus+ or Triple Plus+ IR multi-gas detector from particles and moisture with help from this in-line water trap/particulate filter.



Crowcon M04032/X Standard Sampling Hose for Triple Plus+ and Triple Plus+ IR Multi-Gas Detectors M04032/X
Supplied by the meter, this standard sampling hose works with Triple Plus+ and Triple Plus+ IR multi-gas detectors.



Crowcon C01757 Telescopic Sample Probe for Triple Plus+ and Triple Plus+ IR Multi-Gas Detectors, 33.46 to 61.02in C01757
Use this telescoping sample probe, which extends from 33.46 to 61.02in (85 to 155cm), with your existing Triple Plus+ or Triple Plus+ IR multi-gas detector. The sample probe allows you to sample remotely, such as into chambers during re-entry checks.



Crowcon C01097 Rigid Sample Probe for Triple Plus+ And Triple Plus+ IR Multi-Gas Detectors, 3.28ft C01097
Designed for sampling remotely, including during re-entry checks, this rigid sample probe works with Triple Plus+ and Triple Plus+ IR multi-gas detectors.



Crowcon M05809 Top Label Protective Film for Triple Plus+ and Triple Plus+ IR Multi-Gas Detectors M05809
Compatible with Triple Plus+ and Triple Plus+ IR multi-gas detectors, this self-adhesive film provides extra protection to your unit's keypad and display.



Crowcon C01325 Baffle Plate for Triple Plus+ and Triple Plus+ IR Multi-Gas Detectors C01325
Use this baffle plate with your existing Triple Plus+ or Triple Plus+ IR multi-gas detector. The baffle plate helps protect sensor apertures in extreme conditions, including by helping to reduce splash and sand ingress.



Crowcon C01323 Shoulder Strap for Triple Plus+ Multi-Gas Detectors C01323
Use this shoulder strap with your existing Triple Plus+ multi-gas detector. The strap includes slips for simple attachment.



Crowcon C01007 Carrying Case and Belt for Triple Plus+ And Triple Plus+ IR Multi-Gas Detectors C01007
Easily transport your Triple Plus+ or Triple Plus+ IR multi-gas detector with this carrying case and belt combo.



Crowcon C01685 Aspirator Kit with Pouch for Triple Plus+ and Triple Plus+ IR Multi-Gas Detectors C01685
Use this kit, which includes an aspirator bulb, a flow plate and 6.56 (2m) of standard sampling hose, with your existing Triple Plus+ or Triple Plus+ IR multi-gas detector. The kit helps enable manual sampling.



Poser une question sur le Crowcon TRP-04-XX-Z Triple Plus+ Pumped 2-Gas Detector, Dual IR CH4 %LEL/%Vol/O2

Crowcon TRP-04-XX-Z offre

Intrinsically safe, the Triple Plus+ provides enhanced facilities for safety and detector fleet managers, including a selection of flammable gas correction factors (so 1 unit can be used in several locations across a site) and annotation of the data file with user names and site names selected from pre-configured files in the unit.

Caractéristiques

  • The new IR sensor has no poisoning effects, single or dual range measurement, long life and no burnout, % vol. and % LEL measurement, and IR CO2 detection, 0 to 5%
  • Piercing 85dB alarm at 3.28ft (1m) - gives you confidence in the status of your Triple Plus+, and the environment you're working in
  • Vivid LED alarms with top visibility
  • Confidence blip, low battery and TWA warnings
  • Timed data logging with 100-hour capacity
  • Wide range of electrochemical oxygen and toxic gas sensors - allows you to create your optimum 4 gas Triple Plus+
  • Available for diffusion, manual aspiration or pumped sampling
  • Interchangeable sensor modules
  • Comprehensive data logging with site and user names
  • Triax™ casing will not crack or shatter when dropped - system integrity and operation assured
  • Unique internal design will resist the harshest treatment
  • Full buoyancy - makes recovery from water possible
  • Simple Windows Software interface - user menus allow calibration with or without connecting to a PC
  • QuickCal for rapid calibration
En savoir plus...

Le Crowcon TRP-04-XX-Z comprend

  • Multigas Detector
  • Shoulder Strap
  • Allen Keys
  • Flow Plate
  • Hose
  • Pouch
  • Manual

Cliquer sur une catégorie pour voir une sélection d'accessoires compatible avec le Crowcon TRP-04-XX-Z Triple Plus+ Pumped 2-Gas Detector, Dual IR CH4 %LEL/%Vol/O2.

Crowcon C01985 Single Sensor Calibration Adapter for Triple Plus+ and Triple Plus+ IR Multi-Gas Detectors C01985
Use this single-sensor calibration adapter with your existing Triple Plus+ and Triple Plus+ IR multigas detectors.



Crowcon C01439 Australia Charger/Interface II for Triple Plus+ and Triple Plus+ IR Multi-Gas Detectors C01439
Use this charger/interface with your existing Triple Plus+ or Triple Plus+ IR multi-gas detector. The charger is designed to work for the Australian region.



Crowcon C011321 Single-Way Drop-In Charger with Multi-Region Power Supply C011321
Use this single-way, drop-in charger with a multi-region power supply that has UK, EU, US and Australian plug adapters with your existing Triple Plus+ multi-gas detector.



Crowcon C01438 Europe Charger/Interface II for Triple Plus+ and Triple Plus+ IR Multi-Gas Detectors C01438
Use this charger/interface with your existing Triple Plus+ or Triple Plus+ IR multi-gas detector. The charger is designed to work for the European region.



Crowcon C01626 South Africa Charger/Interface II for Triple Plus+ and Triple Plus+ IR Multi-Gas Detectors C01626
Use this charger/interface with your existing Triple Plus+ or Triple Plus+ IR multi-gas detector. The charger is designed to work for the South African region.



Crowcon C01440 International Charger/Interface II Without Plug for Triple Plus+ and Triple Plus+ IR Multi-Gas Detectors C01440
Use this charger/interface with your existing Triple Plus+ or Triple Plus+ IR multi-gas detector.



Crowcon C01437 USA Charger/Interface II for Triple Plus+ and Triple Plus+ IR Multi-Gas Detectors C01437
Use this charger/interface with your existing Triple Plus+ or Triple Plus+ IR multi-gas detector. The charger is designed to work for the USA region.



Crowcon C03580 Multi-Region Power Supply for Gasman, Tetra 3 and Triple Plus+ Multi-Gas Detectors C03580
Use this multi-region power supply with your existing Gasman, Tetra 3 or Triple Plus+ multi-gas detector. The power supply comes with plug adapters for the UK, EU, US and Australia.



Crowcon H2TRPEC Hydrogen Electrochemical Gas Sensor for Triple Plus+ Multi-Gas Detectors, 0 to 4% H2TRPEC
Made to work with your Triple Plus+ multi-gas detector, this gas sensor detects hydrogen electrochemical gas at levels from 0 to 4%.



Crowcon F2TRP Fluorine Gas Sensor for Triple Plus+ Gas Detectors, 0 to 10ppm F2TRP
This fluorine gas sensor works with your Triple Plus+ multi-gas detector and has a measurement range of 0 to 10ppm.



Crowcon HFTRP Hydrogen Fluoride Gas Sensor for Triple Plus+ Multi-Gas Detectors, 0 to 10ppm HFTRP
Made to work with your Triple Plus+ multi-gas detector, this gas sensor detects hydrogen fluoride gas at levels from 0 to 10ppm.



Crowcon ETOTRP Ethylene Oxide Gas Sensor for Triple Plus+ Gas Detectors, 0 to 10ppm ETOTRP
This ethylene oxide gas sensor works with your Triple Plus+ multi-gas detector and has a measurement range of 0 to 10ppm.



Crowcon VOTRP Volatile Organics Gas Sensor for Triple Plus+ Multi-Gas Detectors, 0 to 100ppm VOTRP
Made to work with your Triple Plus+ multi-gas detector, this gas sensor detects volatile organics at levels from 0 to 100ppm.



Crowcon ASH3TRP Arsine Gas Sensor for Triple Plus+ Multi-Gas Detectors, 0 to 1 ppm ASH3TRP
With a range of 0 to 1 ppm, this sensor for your Triple Plus+ multi-gas detector measures levels of arsine.



Crowcon PH3TRP Phosphine Gas Sensor for Triple Plus+ Multi-Gas Detectors, 0 to 2ppm PH3TRP
Made to work with your Triple Plus+ multi-gas detector, this gas sensor detects phosphine gas at levels from 0 to 2ppm.



Crowcon PH3TRPUK Phosphine Gas Sensor for Triple Plus+ Multi-Gas Detectors, 0 to 2ppm, UK Alarms PH3TRPUK
Made to work with your Triple Plus+ multi-gas detector, this gas sensor with UK alarms detects phosphine gas at levels from 0 to 2ppm.



Crowcon CLO2TRP Chlorine Dioxide Gas Sensor for Triple Plus+ Gas Detectors, 0 to 1ppm CLO2TRP
With a 0 to 1ppm measurement range, this chlorine dioxide gas sensor is designed to check for chlorine dioxide levels when used with your compatible Triple Plus+ gas detector.



Crowcon NH3TRP1000 Ammonia Gas Sensor for Triple Plus+ Multi-Gas Detectors, 0 to 1,000ppm NH3TRP1000
Made to work with your Triple Plus+ multi-gas detector, this gas sensor detects ammonia gas at levels from 0 to 1,000ppm.



Crowcon NH3TRP Ammonia Gas Sensor for Triple Plus+ Multi-Gas Detectors, 0 to 50ppm NH3TRP
Made to work with your Triple Plus+ multi-gas detector, this gas sensor detects ammonia gas at levels from 0 to 50ppm.



Crowcon HCNTRP Hydrogen Cyanide Gas Sensor for Triple Plus+ Multi-Gas Detectors, 0 to 25ppm HCNTRP
Made to work with your Triple Plus+ multi-gas detector, this gas sensor detects hydrogen cyanide gas at levels from 0 to 25ppm.



Crowcon COTRP Carbon Monoxide Gas Sensor for Triple Plus+ Gas Detectors, 0 to 500ppm COTRP
With a 0 to 500ppm measurement range, this carbon monoxide gas sensor is designed to check for carbon monoxide levels when used with your compatible Triple Plus+ gas detector.



Crowcon S011371 Oxygen Gas Sensor for Triple Plus+ Multi-Gas Detectors, 0 to 25% S011371
Made to work with your Triple Plus+ multi-gas detector, this gas sensor detects oxygen gas at levels from 0 to 25%.



Crowcon H2TRPDR Single Hydrogen or Dual Range with H2TRP Gas Sensor for Triple Plus+ Multi-Gas Detectors, 0 to 10% Vol H2TRPDR
Made to work with your Triple Plus+ multi-gas detector, this gas sensor detects single hydrogen or a dual range with H2TRP gas at levels from 0 to 10% volume.



Crowcon CH4TRPDRVOL Methane Gas Sensor for Triple Plus+ Gas Detectors, 0 to 100% LEL, % LEL/% Vol. Units CH4TRPDRVOL
With a 0 to 100% LEL measurement range, this methane gas sensor is designed to check for methane levels when used with your compatible Triple Plus+ gas detector. The sensor supports %LEL and %vol units.



Crowcon CH4TRPDRLEL Methane Gas Sensor for Triple Plus+ Gas Detectors, 0 to 100% LEL, % LEL/% Vol. Units CH4TRPDRLEL
With a 0 to 100% LEL measurement range, this methane gas sensor is designed to check for methane levels when used with your compatible Triple Plus+ gas detector. The sensor supports %LEL and %vol units.



Crowcon FLAMTRPAUS Flammable Gas Sensor for Triple Plus+ Gas Detectors, 0 to 100% LEL, AUS Alarms FLAMTRPAUS
This flammable gas sensor features a 0 to 100% LEL range and AUS alarms to keep you notified. The sensor is made to work with your Triple Plus+ multi-gas detector.



Crowcon FLAMTRPUSA Flammable Gas Sensor for Triple Plus+ Gas Detectors, 0 to 100% LEL, USA Alarms FLAMTRPUSA
This flammable gas sensor features a 0 to 100% LEL range and USA alarms to keep you notified. The sensor is made to work with your Triple Plus+ multi-gas detector.



Crowcon H2TRP Hydrogen Gas Sensor for Triple Plus+ Multi-Gas Detectors, 0 to 100% LEL H2TRP
Made to work with your Triple Plus+ multi-gas detector, this gas sensor detects hydrogen gas at levels from 0 to 100% LEL.



Crowcon C2H4TRP Ethylene Gas Sensor for Triple Plus+ Multi-Gas Detectors, 0 to 100% LEL C2H4TRP
Made to work with Triple Plus+ multi-gas detectors, this gas sensor tests for ethylene gas and features a range of 0 to 100% LEL.



Crowcon C4H10TRP Butane Gas Sensor for Triple Plus+ Multi-Gas Detectors, 0 to 100% LEL C4H10TRP
Made to work with Triple Plus+ multi-gas detectors, this gas sensor tests for butane gas and features a range of 0 to 100% LEL.



Crowcon C5H12TRP Pentane Gas Sensor for Triple Plus+ Multi-Gas Detectors, 0 to 100% LEL C5H12TRP
Made to work with Triple Plus+ multi-gas detectors, this gas sensor tests for pentane gas and features a range of 0 to 100% LEL.



Crowcon C3H8TRP Propane Gas Sensor for Triple Plus+ Multi-Gas Detectors, 0 to 100% LEL C3H8TRP
Made to work with Triple Plus+ multi-gas detectors, this gas sensor tests for propane gas and features a range of 0 to 100% LEL.



Crowcon COTRPUSA Carbon Monoxide Gas Sensor for Triple Plus+ Gas Detectors, 0 to 500ppm, US Alarms COTRPUSA
With a 0 to 500ppm measurement range, this carbon monoxide gas sensor is designed to check for carbon monoxide levels when used with your compatible Triple Plus+ gas detector. The sensor features a US alarm.



Crowcon COTRPAUS Carbon Monoxide Gas Sensor for Triple Plus+ Gas Detectors, 0 to 500ppm, AUS Alarm COTRPAUS
With a 0 to 500ppm measurement range, this carbon monoxide gas sensor is designed to check for carbon monoxide levels when used with your compatible Triple Plus+ gas detector. The sensor features an AUS alarm.



Crowcon COTRPCOMP Carbon Monoxide Gas Sensor for Triple Plus+ Gas Detectors, 0 to 500ppm, H2 Compensated COTRPCOMP
With a 0 to 500ppm measurement range, this carbon monoxide (H2 compensated) gas sensor is designed to check for carbon monoxide levels when used with your compatible Triple Plus+ gas detector.



Crowcon HCLTRP Hydrogen Chloride Gas Sensor for Triple Plus+ Multi-Gas Detectors, 0 to 10ppm HCLTRP
Made to work with your Triple Plus+ multi-gas detector, this gas sensor detects hydrogen chloride gas at levels from 0 to 10ppm.



Crowcon CL2TRP Chlorine Gas Sensor for Triple Plus+ Gas Detectors, 0 to 5ppm CL2TRP
With a 0 to 5ppm measurement range, this chlorine gas sensor is designed to check for chlorine levels when used with your compatible Triple Plus+ gas detector.



Crowcon CL2TRPUK Chlorine Gas Sensor for Triple Plus+ Gas Detectors, 0 to 5ppm, UK Alarm CL2TRPUK
With a 0 to 5ppm measurement range, this chlorine gas sensor is designed to check for chlorine levels when used with your compatible Triple Plus+ gas detector. The sensor features a UK alarm.



Crowcon NO2TRP Nitrogen Dioxide Gas Sensor for Triple Plus+ Multi-Gas Detectors, 0 to 10ppm NO2TRP
Made to work with your Triple Plus+ multi-gas detector, this gas sensor detects nitrogen dioxide gas at levels from 0 to 10ppm.



Crowcon NOTRP Nitric Oxide Gas Sensor for Triple Plus+ Multi-Gas Detectors, 0 to 100ppm NOTRP
Made to work with your Triple Plus+ multi-gas detector, this gas sensor detects nitric oxide gas at levels from 0 to 100ppm.



Crowcon H2TRPPPM Hydrogen Gas Sensor for Triple Plus+ Multi-Gas Detectors, 0 to 2,000ppm H2TRPPPM
Made to work with your Triple Plus+ multi-gas detector, this gas sensor detects hydrogen gas at levels from 0 to 2,000ppm.



Crowcon SO2TRP Sulphur Dioxide Gas Sensor with Hydrogen Sulphide Immune for Triple Plus+ Multi-Gas Detectors, 0 to 10ppm SO2TRP
Made to work with your Triple Plus+ multi-gas detector, this gas sensor detects sulphur dioxide gas at levels from 0 to 10ppm.



Crowcon H2STRP1000 Hydrogen Sulphide Gas Sensor for Triple Plus+ Multi-Gas Detectors, 0 to 1,000ppm H2STRP1000
Made to work with your Triple Plus+ multi-gas detector, this gas sensor detects hydrogen sulphide gas at levels from 0 to 1,000ppm.



Crowcon H2STRPAUS Hydrogen Sulphide Gas Sensor for Triple Plus+ Multi-Gas Detectors, 0 to 50ppm, AUS Alarms H2STRPAUS
Made to work with your Triple Plus+ multi-gas detector, this gas sensor detects hydrogen sulphide gas at levels from 0 to 50ppm and has AUS alarms built in.



Crowcon H2STRPUSA Hydrogen Sulphide Gas Sensor for Triple Plus+ Multi-Gas Detectors, 0 to 50ppm, US Alarms H2STRPUSA
Made to work with your Triple Plus+ multi-gas detector, this gas sensor detects hydrogen sulphide gas at levels from 0 to 50ppm and has US alarms built in.



Crowcon H2STRPALM Hydrogen Sulphide Gas Sensor for Triple Plus+ Multi-Gas Detectors, 0 to 50ppm, Almeer (0 to 200ppm) H2STRPALM
Made to work with your Triple Plus+ multi-gas detector, this gas sensor detects hydrogen sulphide gas at levels from 0 to 50ppm.



Crowcon H2STRP Hydrogen Sulphide Gas Sensor for Triple Plus+ Multi-Gas Detectors, 0 to 50ppm H2STRP
Made to work with your Triple Plus+ multi-gas detector, this gas sensor detects hydrogen sulphide gas at levels from 0 to 50ppm.



Crowcon CH4TRP Methane Gas Sensor for Triple Plus+ Gas Detectors, 0 to 100% LEL CH4TRP
With a 0 to 100% LEL measurement range, this methane gas sensor is designed to check for methane levels when used with your compatible Triple Plus+ gas detector.



Crowcon C03141 Drop Line for Triple Plus+ Multi-Gas Detectors, 19.69ft C03141
Undertake pre-entry checks with your existing Triple Plus+ multi-gas detector with help from this 19.69ft (6m) drop line.



Crowcon FIL29001 In-Line Water Trap/Particulate Filter for Triple Plus+ and Triple Plus+ IR Gas Detectors FIL29001
Safeguard your Triple Plus+ or Triple Plus+ IR multi-gas detector from particles and moisture with help from this in-line water trap/particulate filter.



Crowcon M04032/X Standard Sampling Hose for Triple Plus+ and Triple Plus+ IR Multi-Gas Detectors M04032/X
Supplied by the meter, this standard sampling hose works with Triple Plus+ and Triple Plus+ IR multi-gas detectors.



Crowcon C01757 Telescopic Sample Probe for Triple Plus+ and Triple Plus+ IR Multi-Gas Detectors, 33.46 to 61.02in C01757
Use this telescoping sample probe, which extends from 33.46 to 61.02in (85 to 155cm), with your existing Triple Plus+ or Triple Plus+ IR multi-gas detector. The sample probe allows you to sample remotely, such as into chambers during re-entry checks.



Crowcon C01097 Rigid Sample Probe for Triple Plus+ And Triple Plus+ IR Multi-Gas Detectors, 3.28ft C01097
Designed for sampling remotely, including during re-entry checks, this rigid sample probe works with Triple Plus+ and Triple Plus+ IR multi-gas detectors.



Crowcon M05809 Top Label Protective Film for Triple Plus+ and Triple Plus+ IR Multi-Gas Detectors M05809
Compatible with Triple Plus+ and Triple Plus+ IR multi-gas detectors, this self-adhesive film provides extra protection to your unit's keypad and display.



Crowcon C01325 Baffle Plate for Triple Plus+ and Triple Plus+ IR Multi-Gas Detectors C01325
Use this baffle plate with your existing Triple Plus+ or Triple Plus+ IR multi-gas detector. The baffle plate helps protect sensor apertures in extreme conditions, including by helping to reduce splash and sand ingress.



Crowcon C01323 Shoulder Strap for Triple Plus+ Multi-Gas Detectors C01323
Use this shoulder strap with your existing Triple Plus+ multi-gas detector. The strap includes slips for simple attachment.



Crowcon C01007 Carrying Case and Belt for Triple Plus+ And Triple Plus+ IR Multi-Gas Detectors C01007
Easily transport your Triple Plus+ or Triple Plus+ IR multi-gas detector with this carrying case and belt combo.



Crowcon C01685 Aspirator Kit with Pouch for Triple Plus+ and Triple Plus+ IR Multi-Gas Detectors C01685
Use this kit, which includes an aspirator bulb, a flow plate and 6.56 (2m) of standard sampling hose, with your existing Triple Plus+ or Triple Plus+ IR multi-gas detector. The kit helps enable manual sampling.



Poser une question sur le Crowcon TRP-04-XX-Z Triple Plus+ Pumped 2-Gas Detector, Dual IR CH4 %LEL/%Vol/O2

Plus de produits Crowcon



  • Nous acceptons ces méthodes de paiement:
  • Visa, Master Card, Discover, American Express & PayPal
  • Nous acceptons également les virements électroniques / TEF, les chèques et les bons de commande avec approbation de crédit. Les méthodes de paiement acceptées varient selon les pays.