Crowcon TRP-02-XX-Z Triple Plus+ Pumped 3-Gas Detector, IR CH4 %LEL/O2/H2S

Modèle: TRP-02-XX-Z

Crowcon TRP-02-XX-Z Triple Plus+ Pumped 3-Gas Detector, IR CH4 %LEL/O2/H2S

Modèle: TRP-02-XX-Z

This multi-gas detector detects 3 toxic gases, including IR CH4 (% LEL), O2 and H2S, and it comes with an internal pump with an on/off button. The gas detector features LIBRA lithium-ion battery technology and an IR sensor option for flammable hydrocarbons or carbon dioxide measurements.

This multi-gas detector detects 3 toxic gases, including IR CH4 (% LEL), O2 and H2S, and it comes with an internal pump with an on/off button. The gas detector features LIBRA lithium-ion battery technology and an IR sensor option for flammable hydrocarbons or carbon dioxide measurements.

Discontinué!

Ce produit a été discontinué et n’est plus disponible.
Voici le produit de remplacement direct :

Crowcon Gas-Pro Portable 5 Gas Detector-

Crowcon Gas-Pro Portable 5 Gas Detector

Modèle: GAS-PRO SERIES

A portable detector monitoring up to 5 gases, including Hâ‚‚S, CO, and oxygen depletion, with a compact design and pre-entry check.


Crowcon TRP-02-XX-Z Offers

Intrinsically safe, the Triple Plus+ provides enhanced facilities for safety and detector fleet managers, including a selection of flammable gas correction factors (so 1 unit can be used in several locations across a site) and annotation of the data file with user names and site names selected from pre-configured files in the unit.

Features

  • The new IR sensor has no poisoning effects, single or dual range measurement, long life and no burnout, % vol. and % LEL measurement, and IR CO2 detection, 0 to 5%
  • Piercing 85dB alarm at 3.28ft (1m) - gives you confidence in the status of your Triple Plus+, and the environment you're working in
  • Vivid LED alarms with top visibility
  • Confidence blip, low battery and TWA warnings
  • Timed data logging with 100-hour capacity
  • Wide range of electrochemical oxygen and toxic gas sensors - allows you to create your optimum 4 gas Triple Plus+
  • Available for diffusion, manual aspiration or pumped sampling
  • Interchangeable sensor modules
  • Comprehensive data logging with site and user names
  • Triax™ casing will not crack or shatter when dropped - system integrity and operation assured
  • Unique internal design will resist the harshest treatment
  • Full buoyancy - makes recovery from water possible
  • Simple Windows Software interface - user menus allow calibration with or without connecting to a PC
  • QuickCal for rapid calibration

Crowcon TRP-02-XX-Z Specifications

Data Logging
Alarms
Piercing, rapid intermittent, piezo-electric tone 85dB at 3.28ft (1m); Confidence blip (selectable); Distinctive double blip for low battery with user accept
Gas hazard: vivid flashing red LED Instrument is working: slow flashing green LED Low battery: distinctive double flash of green LED
Display
2 lines of 24 characters, dot matrix high-contrast LCD with back light operating for 30 minutes; Values and units for up to 4 gases displayed simultaneously at current, TWA or peak levels; Low battery, pump failure, real time and elapsed time, calibration and configuration data also displayed
Adjustable sample rate, 100 hours at 1 minute sample rate (maximum 6,000 data points per channel), logging of events, user and site
Battery
Rechargeable Li-ion battery pack
Standard instrument >12 hours
Pumped instrument >10 hours
Charging: Dual rate drop-in charger; Dual rate charger/PC interface 
Expected Sensor Life
Flammable: 5 years (Triple Plus+)
IR: 5 years (Triple Plus+ IR)
Toxic: 3 years
Oxygen: 2 years
Typical Response Times
Methane 20s (Triple Plus+); IR 20s (Triple Plus+IR); Oxygen 10s; typical Toxic Gas 20s
Sampling
Optional internal electric pump with on/off button
Operating Temperature
-4 to 122°F (-20 to 50°C)
Size
4.65 x 7.8 x 2.9in (118 x 200 x 73mm)
Weight
31oz (880g) gas

What's included with the Crowcon TRP-02-XX-Z

  • Multigas Detector
  • Shoulder Strap
  • Allen Keys
  • Flow Plate
  • Hose
  • Pouch
  • Manual

Cliquer sur une catégorie pour voir une sélection d'accessoires compatible avec le Crowcon TRP-02-XX-Z Triple Plus+ Pumped 3-Gas Detector, IR CH4 %LEL/O2/H2S.

Crowcon C01985 Single Sensor Calibration Adapter for Triple Plus+ and Triple Plus+ IR Multi-Gas Detectors C01985
Use this single-sensor calibration adapter with your existing Triple Plus+ and Triple Plus+ IR multigas detectors.




Crowcon C01439 Australia Charger/Interface II for Triple Plus+ and Triple Plus+ IR Multi-Gas Detectors C01439
Use this charger/interface with your existing Triple Plus+ or Triple Plus+ IR multi-gas detector. The charger is designed to work for the Australian region.




Crowcon C011321 Single-Way Drop-In Charger with Multi-Region Power Supply C011321
Use this single-way, drop-in charger with a multi-region power supply that has UK, EU, US and Australian plug adapters with your existing Triple Plus+ multi-gas detector.




Crowcon C01438 Europe Charger/Interface II for Triple Plus+ and Triple Plus+ IR Multi-Gas Detectors C01438
Use this charger/interface with your existing Triple Plus+ or Triple Plus+ IR multi-gas detector. The charger is designed to work for the European region.




Crowcon C01626 South Africa Charger/Interface II for Triple Plus+ and Triple Plus+ IR Multi-Gas Detectors C01626
Use this charger/interface with your existing Triple Plus+ or Triple Plus+ IR multi-gas detector. The charger is designed to work for the South African region.




Crowcon C01440 International Charger/Interface II Without Plug for Triple Plus+ and Triple Plus+ IR Multi-Gas Detectors C01440
Use this charger/interface with your existing Triple Plus+ or Triple Plus+ IR multi-gas detector.




Crowcon C01437 USA Charger/Interface II for Triple Plus+ and Triple Plus+ IR Multi-Gas Detectors C01437
Use this charger/interface with your existing Triple Plus+ or Triple Plus+ IR multi-gas detector. The charger is designed to work for the USA region.




Crowcon C03580 Multi-Region Power Supply for Gasman, Tetra 3 and Triple Plus+ Multi-Gas Detectors C03580
Use this multi-region power supply with your existing Gasman, Tetra 3 or Triple Plus+ multi-gas detector. The power supply comes with plug adapters for the UK, EU, US and Australia.




Crowcon H2TRPEC Hydrogen Electrochemical Gas Sensor for Triple Plus+ Multi-Gas Detectors, 0 to 4% H2TRPEC
Made to work with your Triple Plus+ multi-gas detector, this gas sensor detects hydrogen electrochemical gas at levels from 0 to 4%.




Crowcon F2TRP Fluorine Gas Sensor for Triple Plus+ Gas Detectors, 0 to 10ppm F2TRP
This fluorine gas sensor works with your Triple Plus+ multi-gas detector and has a measurement range of 0 to 10ppm.




Crowcon HFTRP Hydrogen Fluoride Gas Sensor for Triple Plus+ Multi-Gas Detectors, 0 to 10ppm HFTRP
Made to work with your Triple Plus+ multi-gas detector, this gas sensor detects hydrogen fluoride gas at levels from 0 to 10ppm.




Crowcon ETOTRP Ethylene Oxide Gas Sensor for Triple Plus+ Gas Detectors, 0 to 10ppm ETOTRP
This ethylene oxide gas sensor works with your Triple Plus+ multi-gas detector and has a measurement range of 0 to 10ppm.




Crowcon VOTRP Volatile Organics Gas Sensor for Triple Plus+ Multi-Gas Detectors, 0 to 100ppm VOTRP
Made to work with your Triple Plus+ multi-gas detector, this gas sensor detects volatile organics at levels from 0 to 100ppm.




Crowcon ASH3TRP Arsine Gas Sensor for Triple Plus+ Multi-Gas Detectors, 0 to 1 ppm ASH3TRP
With a range of 0 to 1 ppm, this sensor for your Triple Plus+ multi-gas detector measures levels of arsine.




Crowcon PH3TRP Phosphine Gas Sensor for Triple Plus+ Multi-Gas Detectors, 0 to 2ppm PH3TRP
Made to work with your Triple Plus+ multi-gas detector, this gas sensor detects phosphine gas at levels from 0 to 2ppm.




Crowcon PH3TRPUK Phosphine Gas Sensor for Triple Plus+ Multi-Gas Detectors, 0 to 2ppm, UK Alarms PH3TRPUK
Made to work with your Triple Plus+ multi-gas detector, this gas sensor with UK alarms detects phosphine gas at levels from 0 to 2ppm.




Crowcon CLO2TRP Chlorine Dioxide Gas Sensor for Triple Plus+ Gas Detectors, 0 to 1ppm CLO2TRP
With a 0 to 1ppm measurement range, this chlorine dioxide gas sensor is designed to check for chlorine dioxide levels when used with your compatible Triple Plus+ gas detector.




Crowcon NH3TRP1000 Ammonia Gas Sensor for Triple Plus+ Multi-Gas Detectors, 0 to 1,000ppm NH3TRP1000
Made to work with your Triple Plus+ multi-gas detector, this gas sensor detects ammonia gas at levels from 0 to 1,000ppm.




Crowcon NH3TRP Ammonia Gas Sensor for Triple Plus+ Multi-Gas Detectors, 0 to 50ppm NH3TRP
Made to work with your Triple Plus+ multi-gas detector, this gas sensor detects ammonia gas at levels from 0 to 50ppm.




Crowcon HCNTRP Hydrogen Cyanide Gas Sensor for Triple Plus+ Multi-Gas Detectors, 0 to 25ppm HCNTRP
Made to work with your Triple Plus+ multi-gas detector, this gas sensor detects hydrogen cyanide gas at levels from 0 to 25ppm.




Crowcon COTRP Carbon Monoxide Gas Sensor for Triple Plus+ Gas Detectors, 0 to 500ppm COTRP
With a 0 to 500ppm measurement range, this carbon monoxide gas sensor is designed to check for carbon monoxide levels when used with your compatible Triple Plus+ gas detector.




Crowcon S011371 Oxygen Gas Sensor for Triple Plus+ Multi-Gas Detectors, 0 to 25% S011371
Made to work with your Triple Plus+ multi-gas detector, this gas sensor detects oxygen gas at levels from 0 to 25%.




Crowcon H2TRPDR Single Hydrogen or Dual Range with H2TRP Gas Sensor for Triple Plus+ Multi-Gas Detectors, 0 to 10% Vol H2TRPDR
Made to work with your Triple Plus+ multi-gas detector, this gas sensor detects single hydrogen or a dual range with H2TRP gas at levels from 0 to 10% volume.




Crowcon CH4TRPDRVOL Methane Gas Sensor for Triple Plus+ Gas Detectors, 0 to 100% LEL, % LEL/% Vol. Units CH4TRPDRVOL
With a 0 to 100% LEL measurement range, this methane gas sensor is designed to check for methane levels when used with your compatible Triple Plus+ gas detector. The sensor supports %LEL and %vol units.




Crowcon CH4TRPDRLEL Methane Gas Sensor for Triple Plus+ Gas Detectors, 0 to 100% LEL, % LEL/% Vol. Units CH4TRPDRLEL
With a 0 to 100% LEL measurement range, this methane gas sensor is designed to check for methane levels when used with your compatible Triple Plus+ gas detector. The sensor supports %LEL and %vol units.




Crowcon FLAMTRPAUS Flammable Gas Sensor for Triple Plus+ Gas Detectors, 0 to 100% LEL, AUS Alarms FLAMTRPAUS
This flammable gas sensor features a 0 to 100% LEL range and AUS alarms to keep you notified. The sensor is made to work with your Triple Plus+ multi-gas detector.




Crowcon FLAMTRPUSA Flammable Gas Sensor for Triple Plus+ Gas Detectors, 0 to 100% LEL, USA Alarms FLAMTRPUSA
This flammable gas sensor features a 0 to 100% LEL range and USA alarms to keep you notified. The sensor is made to work with your Triple Plus+ multi-gas detector.




Crowcon H2TRP Hydrogen Gas Sensor for Triple Plus+ Multi-Gas Detectors, 0 to 100% LEL H2TRP
Made to work with your Triple Plus+ multi-gas detector, this gas sensor detects hydrogen gas at levels from 0 to 100% LEL.




Crowcon C2H4TRP Ethylene Gas Sensor for Triple Plus+ Multi-Gas Detectors, 0 to 100% LEL C2H4TRP
Made to work with Triple Plus+ multi-gas detectors, this gas sensor tests for ethylene gas and features a range of 0 to 100% LEL.




Crowcon C4H10TRP Butane Gas Sensor for Triple Plus+ Multi-Gas Detectors, 0 to 100% LEL C4H10TRP
Made to work with Triple Plus+ multi-gas detectors, this gas sensor tests for butane gas and features a range of 0 to 100% LEL.




Crowcon C5H12TRP Pentane Gas Sensor for Triple Plus+ Multi-Gas Detectors, 0 to 100% LEL C5H12TRP
Made to work with Triple Plus+ multi-gas detectors, this gas sensor tests for pentane gas and features a range of 0 to 100% LEL.




Crowcon C3H8TRP Propane Gas Sensor for Triple Plus+ Multi-Gas Detectors, 0 to 100% LEL C3H8TRP
Made to work with Triple Plus+ multi-gas detectors, this gas sensor tests for propane gas and features a range of 0 to 100% LEL.




Crowcon COTRPUSA Carbon Monoxide Gas Sensor for Triple Plus+ Gas Detectors, 0 to 500ppm, US Alarms COTRPUSA
With a 0 to 500ppm measurement range, this carbon monoxide gas sensor is designed to check for carbon monoxide levels when used with your compatible Triple Plus+ gas detector. The sensor features a US alarm.




Crowcon COTRPAUS Carbon Monoxide Gas Sensor for Triple Plus+ Gas Detectors, 0 to 500ppm, AUS Alarm COTRPAUS
With a 0 to 500ppm measurement range, this carbon monoxide gas sensor is designed to check for carbon monoxide levels when used with your compatible Triple Plus+ gas detector. The sensor features an AUS alarm.




Crowcon COTRPCOMP Carbon Monoxide Gas Sensor for Triple Plus+ Gas Detectors, 0 to 500ppm, H2 Compensated COTRPCOMP
With a 0 to 500ppm measurement range, this carbon monoxide (H2 compensated) gas sensor is designed to check for carbon monoxide levels when used with your compatible Triple Plus+ gas detector.




Crowcon HCLTRP Hydrogen Chloride Gas Sensor for Triple Plus+ Multi-Gas Detectors, 0 to 10ppm HCLTRP
Made to work with your Triple Plus+ multi-gas detector, this gas sensor detects hydrogen chloride gas at levels from 0 to 10ppm.




Crowcon CL2TRP Chlorine Gas Sensor for Triple Plus+ Gas Detectors, 0 to 5ppm CL2TRP
With a 0 to 5ppm measurement range, this chlorine gas sensor is designed to check for chlorine levels when used with your compatible Triple Plus+ gas detector.




Crowcon CL2TRPUK Chlorine Gas Sensor for Triple Plus+ Gas Detectors, 0 to 5ppm, UK Alarm CL2TRPUK
With a 0 to 5ppm measurement range, this chlorine gas sensor is designed to check for chlorine levels when used with your compatible Triple Plus+ gas detector. The sensor features a UK alarm.




Crowcon NO2TRP Nitrogen Dioxide Gas Sensor for Triple Plus+ Multi-Gas Detectors, 0 to 10ppm NO2TRP
Made to work with your Triple Plus+ multi-gas detector, this gas sensor detects nitrogen dioxide gas at levels from 0 to 10ppm.




Crowcon NOTRP Nitric Oxide Gas Sensor for Triple Plus+ Multi-Gas Detectors, 0 to 100ppm NOTRP
Made to work with your Triple Plus+ multi-gas detector, this gas sensor detects nitric oxide gas at levels from 0 to 100ppm.




Crowcon H2TRPPPM Hydrogen Gas Sensor for Triple Plus+ Multi-Gas Detectors, 0 to 2,000ppm H2TRPPPM
Made to work with your Triple Plus+ multi-gas detector, this gas sensor detects hydrogen gas at levels from 0 to 2,000ppm.




Crowcon SO2TRP Sulphur Dioxide Gas Sensor with Hydrogen Sulphide Immune for Triple Plus+ Multi-Gas Detectors, 0 to 10ppm SO2TRP
Made to work with your Triple Plus+ multi-gas detector, this gas sensor detects sulphur dioxide gas at levels from 0 to 10ppm.




Crowcon H2STRP1000 Hydrogen Sulphide Gas Sensor for Triple Plus+ Multi-Gas Detectors, 0 to 1,000ppm H2STRP1000
Made to work with your Triple Plus+ multi-gas detector, this gas sensor detects hydrogen sulphide gas at levels from 0 to 1,000ppm.




Crowcon H2STRPAUS Hydrogen Sulphide Gas Sensor for Triple Plus+ Multi-Gas Detectors, 0 to 50ppm, AUS Alarms H2STRPAUS
Made to work with your Triple Plus+ multi-gas detector, this gas sensor detects hydrogen sulphide gas at levels from 0 to 50ppm and has AUS alarms built in.




Crowcon H2STRPUSA Hydrogen Sulphide Gas Sensor for Triple Plus+ Multi-Gas Detectors, 0 to 50ppm, US Alarms H2STRPUSA
Made to work with your Triple Plus+ multi-gas detector, this gas sensor detects hydrogen sulphide gas at levels from 0 to 50ppm and has US alarms built in.




Crowcon H2STRPALM Hydrogen Sulphide Gas Sensor for Triple Plus+ Multi-Gas Detectors, 0 to 50ppm, Almeer (0 to 200ppm) H2STRPALM
Made to work with your Triple Plus+ multi-gas detector, this gas sensor detects hydrogen sulphide gas at levels from 0 to 50ppm.




Crowcon H2STRP Hydrogen Sulphide Gas Sensor for Triple Plus+ Multi-Gas Detectors, 0 to 50ppm H2STRP
Made to work with your Triple Plus+ multi-gas detector, this gas sensor detects hydrogen sulphide gas at levels from 0 to 50ppm.




Crowcon CH4TRP Methane Gas Sensor for Triple Plus+ Gas Detectors, 0 to 100% LEL CH4TRP
With a 0 to 100% LEL measurement range, this methane gas sensor is designed to check for methane levels when used with your compatible Triple Plus+ gas detector.




Crowcon C03141 Drop Line for Triple Plus+ Multi-Gas Detectors, 19.69ft C03141
Undertake pre-entry checks with your existing Triple Plus+ multi-gas detector with help from this 19.69ft (6m) drop line.




Crowcon FIL29001 In-Line Water Trap/Particulate Filter for Triple Plus+ and Triple Plus+ IR Gas Detectors FIL29001
Safeguard your Triple Plus+ or Triple Plus+ IR multi-gas detector from particles and moisture with help from this in-line water trap/particulate filter.




Crowcon M04032/X Standard Sampling Hose for Triple Plus+ and Triple Plus+ IR Multi-Gas Detectors M04032/X
Supplied by the meter, this standard sampling hose works with Triple Plus+ and Triple Plus+ IR multi-gas detectors.




Crowcon C01757 Telescopic Sample Probe for Triple Plus+ and Triple Plus+ IR Multi-Gas Detectors, 33.46 to 61.02in C01757
Use this telescoping sample probe, which extends from 33.46 to 61.02in (85 to 155cm), with your existing Triple Plus+ or Triple Plus+ IR multi-gas detector. The sample probe allows you to sample remotely, such as into chambers during re-entry checks.




Crowcon C01097 Rigid Sample Probe for Triple Plus+ And Triple Plus+ IR Multi-Gas Detectors, 3.28ft C01097
Designed for sampling remotely, including during re-entry checks, this rigid sample probe works with Triple Plus+ and Triple Plus+ IR multi-gas detectors.




Crowcon M05809 Top Label Protective Film for Triple Plus+ and Triple Plus+ IR Multi-Gas Detectors M05809
Compatible with Triple Plus+ and Triple Plus+ IR multi-gas detectors, this self-adhesive film provides extra protection to your unit's keypad and display.




Crowcon C01325 Baffle Plate for Triple Plus+ and Triple Plus+ IR Multi-Gas Detectors C01325
Use this baffle plate with your existing Triple Plus+ or Triple Plus+ IR multi-gas detector. The baffle plate helps protect sensor apertures in extreme conditions, including by helping to reduce splash and sand ingress.




Crowcon C01323 Shoulder Strap for Triple Plus+ Multi-Gas Detectors C01323
Use this shoulder strap with your existing Triple Plus+ multi-gas detector. The strap includes slips for simple attachment.




Crowcon C01007 Carrying Case and Belt for Triple Plus+ And Triple Plus+ IR Multi-Gas Detectors C01007
Easily transport your Triple Plus+ or Triple Plus+ IR multi-gas detector with this carrying case and belt combo.




Crowcon C01685 Aspirator Kit with Pouch for Triple Plus+ and Triple Plus+ IR Multi-Gas Detectors C01685
Use this kit, which includes an aspirator bulb, a flow plate and 6.56 (2m) of standard sampling hose, with your existing Triple Plus+ or Triple Plus+ IR multi-gas detector. The kit helps enable manual sampling.




Poser une question sur le Crowcon TRP-02-XX-Z Triple Plus+ Pumped 3-Gas Detector, IR CH4 %LEL/O2/H2S

Crowcon TRP-02-XX-Z Offers

Intrinsically safe, the Triple Plus+ provides enhanced facilities for safety and detector fleet managers, including a selection of flammable gas correction factors (so 1 unit can be used in several locations across a site) and annotation of the data file with user names and site names selected from pre-configured files in the unit.

Features

  • The new IR sensor has no poisoning effects, single or dual range measurement, long life and no burnout, % vol. and % LEL measurement, and IR CO2 detection, 0 to 5%
  • Piercing 85dB alarm at 3.28ft (1m) - gives you confidence in the status of your Triple Plus+, and the environment you're working in
  • Vivid LED alarms with top visibility
  • Confidence blip, low battery and TWA warnings
  • Timed data logging with 100-hour capacity
  • Wide range of electrochemical oxygen and toxic gas sensors - allows you to create your optimum 4 gas Triple Plus+
  • Available for diffusion, manual aspiration or pumped sampling
  • Interchangeable sensor modules
  • Comprehensive data logging with site and user names
  • Triax™ casing will not crack or shatter when dropped - system integrity and operation assured
  • Unique internal design will resist the harshest treatment
  • Full buoyancy - makes recovery from water possible
  • Simple Windows Software interface - user menus allow calibration with or without connecting to a PC
  • QuickCal for rapid calibration

Crowcon TRP-02-XX-Z Specifications

Data Logging
Alarms
Piercing, rapid intermittent, piezo-electric tone 85dB at 3.28ft (1m); Confidence blip (selectable); Distinctive double blip for low battery with user accept
Gas hazard: vivid flashing red LED Instrument is working: slow flashing green LED Low battery: distinctive double flash of green LED
Display
2 lines of 24 characters, dot matrix high-contrast LCD with back light operating for 30 minutes; Values and units for up to 4 gases displayed simultaneously at current, TWA or peak levels; Low battery, pump failure, real time and elapsed time, calibration and configuration data also displayed
Adjustable sample rate, 100 hours at 1 minute sample rate (maximum 6,000 data points per channel), logging of events, user and site
Battery
Rechargeable Li-ion battery pack
Standard instrument >12 hours
Pumped instrument >10 hours
Charging: Dual rate drop-in charger; Dual rate charger/PC interface 
Expected Sensor Life
Flammable: 5 years (Triple Plus+)
IR: 5 years (Triple Plus+ IR)
Toxic: 3 years
Oxygen: 2 years
Typical Response Times
Methane 20s (Triple Plus+); IR 20s (Triple Plus+IR); Oxygen 10s; typical Toxic Gas 20s
Sampling
Optional internal electric pump with on/off button
Operating Temperature
-4 to 122°F (-20 to 50°C)
Size
4.65 x 7.8 x 2.9in (118 x 200 x 73mm)
Weight
31oz (880g) gas

What's included with the Crowcon TRP-02-XX-Z

  • Multigas Detector
  • Shoulder Strap
  • Allen Keys
  • Flow Plate
  • Hose
  • Pouch
  • Manual

Cliquer sur une catégorie pour voir une sélection d'accessoires compatible avec le Crowcon TRP-02-XX-Z Triple Plus+ Pumped 3-Gas Detector, IR CH4 %LEL/O2/H2S.

Crowcon C01985 Single Sensor Calibration Adapter for Triple Plus+ and Triple Plus+ IR Multi-Gas Detectors C01985
Use this single-sensor calibration adapter with your existing Triple Plus+ and Triple Plus+ IR multigas detectors.




Crowcon C01439 Australia Charger/Interface II for Triple Plus+ and Triple Plus+ IR Multi-Gas Detectors C01439
Use this charger/interface with your existing Triple Plus+ or Triple Plus+ IR multi-gas detector. The charger is designed to work for the Australian region.




Crowcon C011321 Single-Way Drop-In Charger with Multi-Region Power Supply C011321
Use this single-way, drop-in charger with a multi-region power supply that has UK, EU, US and Australian plug adapters with your existing Triple Plus+ multi-gas detector.




Crowcon C01438 Europe Charger/Interface II for Triple Plus+ and Triple Plus+ IR Multi-Gas Detectors C01438
Use this charger/interface with your existing Triple Plus+ or Triple Plus+ IR multi-gas detector. The charger is designed to work for the European region.




Crowcon C01626 South Africa Charger/Interface II for Triple Plus+ and Triple Plus+ IR Multi-Gas Detectors C01626
Use this charger/interface with your existing Triple Plus+ or Triple Plus+ IR multi-gas detector. The charger is designed to work for the South African region.




Crowcon C01440 International Charger/Interface II Without Plug for Triple Plus+ and Triple Plus+ IR Multi-Gas Detectors C01440
Use this charger/interface with your existing Triple Plus+ or Triple Plus+ IR multi-gas detector.




Crowcon C01437 USA Charger/Interface II for Triple Plus+ and Triple Plus+ IR Multi-Gas Detectors C01437
Use this charger/interface with your existing Triple Plus+ or Triple Plus+ IR multi-gas detector. The charger is designed to work for the USA region.




Crowcon C03580 Multi-Region Power Supply for Gasman, Tetra 3 and Triple Plus+ Multi-Gas Detectors C03580
Use this multi-region power supply with your existing Gasman, Tetra 3 or Triple Plus+ multi-gas detector. The power supply comes with plug adapters for the UK, EU, US and Australia.




Crowcon H2TRPEC Hydrogen Electrochemical Gas Sensor for Triple Plus+ Multi-Gas Detectors, 0 to 4% H2TRPEC
Made to work with your Triple Plus+ multi-gas detector, this gas sensor detects hydrogen electrochemical gas at levels from 0 to 4%.




Crowcon F2TRP Fluorine Gas Sensor for Triple Plus+ Gas Detectors, 0 to 10ppm F2TRP
This fluorine gas sensor works with your Triple Plus+ multi-gas detector and has a measurement range of 0 to 10ppm.




Crowcon HFTRP Hydrogen Fluoride Gas Sensor for Triple Plus+ Multi-Gas Detectors, 0 to 10ppm HFTRP
Made to work with your Triple Plus+ multi-gas detector, this gas sensor detects hydrogen fluoride gas at levels from 0 to 10ppm.




Crowcon ETOTRP Ethylene Oxide Gas Sensor for Triple Plus+ Gas Detectors, 0 to 10ppm ETOTRP
This ethylene oxide gas sensor works with your Triple Plus+ multi-gas detector and has a measurement range of 0 to 10ppm.




Crowcon VOTRP Volatile Organics Gas Sensor for Triple Plus+ Multi-Gas Detectors, 0 to 100ppm VOTRP
Made to work with your Triple Plus+ multi-gas detector, this gas sensor detects volatile organics at levels from 0 to 100ppm.




Crowcon ASH3TRP Arsine Gas Sensor for Triple Plus+ Multi-Gas Detectors, 0 to 1 ppm ASH3TRP
With a range of 0 to 1 ppm, this sensor for your Triple Plus+ multi-gas detector measures levels of arsine.




Crowcon PH3TRP Phosphine Gas Sensor for Triple Plus+ Multi-Gas Detectors, 0 to 2ppm PH3TRP
Made to work with your Triple Plus+ multi-gas detector, this gas sensor detects phosphine gas at levels from 0 to 2ppm.




Crowcon PH3TRPUK Phosphine Gas Sensor for Triple Plus+ Multi-Gas Detectors, 0 to 2ppm, UK Alarms PH3TRPUK
Made to work with your Triple Plus+ multi-gas detector, this gas sensor with UK alarms detects phosphine gas at levels from 0 to 2ppm.




Crowcon CLO2TRP Chlorine Dioxide Gas Sensor for Triple Plus+ Gas Detectors, 0 to 1ppm CLO2TRP
With a 0 to 1ppm measurement range, this chlorine dioxide gas sensor is designed to check for chlorine dioxide levels when used with your compatible Triple Plus+ gas detector.




Crowcon NH3TRP1000 Ammonia Gas Sensor for Triple Plus+ Multi-Gas Detectors, 0 to 1,000ppm NH3TRP1000
Made to work with your Triple Plus+ multi-gas detector, this gas sensor detects ammonia gas at levels from 0 to 1,000ppm.




Crowcon NH3TRP Ammonia Gas Sensor for Triple Plus+ Multi-Gas Detectors, 0 to 50ppm NH3TRP
Made to work with your Triple Plus+ multi-gas detector, this gas sensor detects ammonia gas at levels from 0 to 50ppm.




Crowcon HCNTRP Hydrogen Cyanide Gas Sensor for Triple Plus+ Multi-Gas Detectors, 0 to 25ppm HCNTRP
Made to work with your Triple Plus+ multi-gas detector, this gas sensor detects hydrogen cyanide gas at levels from 0 to 25ppm.




Crowcon COTRP Carbon Monoxide Gas Sensor for Triple Plus+ Gas Detectors, 0 to 500ppm COTRP
With a 0 to 500ppm measurement range, this carbon monoxide gas sensor is designed to check for carbon monoxide levels when used with your compatible Triple Plus+ gas detector.




Crowcon S011371 Oxygen Gas Sensor for Triple Plus+ Multi-Gas Detectors, 0 to 25% S011371
Made to work with your Triple Plus+ multi-gas detector, this gas sensor detects oxygen gas at levels from 0 to 25%.




Crowcon H2TRPDR Single Hydrogen or Dual Range with H2TRP Gas Sensor for Triple Plus+ Multi-Gas Detectors, 0 to 10% Vol H2TRPDR
Made to work with your Triple Plus+ multi-gas detector, this gas sensor detects single hydrogen or a dual range with H2TRP gas at levels from 0 to 10% volume.




Crowcon CH4TRPDRVOL Methane Gas Sensor for Triple Plus+ Gas Detectors, 0 to 100% LEL, % LEL/% Vol. Units CH4TRPDRVOL
With a 0 to 100% LEL measurement range, this methane gas sensor is designed to check for methane levels when used with your compatible Triple Plus+ gas detector. The sensor supports %LEL and %vol units.




Crowcon CH4TRPDRLEL Methane Gas Sensor for Triple Plus+ Gas Detectors, 0 to 100% LEL, % LEL/% Vol. Units CH4TRPDRLEL
With a 0 to 100% LEL measurement range, this methane gas sensor is designed to check for methane levels when used with your compatible Triple Plus+ gas detector. The sensor supports %LEL and %vol units.




Crowcon FLAMTRPAUS Flammable Gas Sensor for Triple Plus+ Gas Detectors, 0 to 100% LEL, AUS Alarms FLAMTRPAUS
This flammable gas sensor features a 0 to 100% LEL range and AUS alarms to keep you notified. The sensor is made to work with your Triple Plus+ multi-gas detector.




Crowcon FLAMTRPUSA Flammable Gas Sensor for Triple Plus+ Gas Detectors, 0 to 100% LEL, USA Alarms FLAMTRPUSA
This flammable gas sensor features a 0 to 100% LEL range and USA alarms to keep you notified. The sensor is made to work with your Triple Plus+ multi-gas detector.




Crowcon H2TRP Hydrogen Gas Sensor for Triple Plus+ Multi-Gas Detectors, 0 to 100% LEL H2TRP
Made to work with your Triple Plus+ multi-gas detector, this gas sensor detects hydrogen gas at levels from 0 to 100% LEL.




Crowcon C2H4TRP Ethylene Gas Sensor for Triple Plus+ Multi-Gas Detectors, 0 to 100% LEL C2H4TRP
Made to work with Triple Plus+ multi-gas detectors, this gas sensor tests for ethylene gas and features a range of 0 to 100% LEL.




Crowcon C4H10TRP Butane Gas Sensor for Triple Plus+ Multi-Gas Detectors, 0 to 100% LEL C4H10TRP
Made to work with Triple Plus+ multi-gas detectors, this gas sensor tests for butane gas and features a range of 0 to 100% LEL.




Crowcon C5H12TRP Pentane Gas Sensor for Triple Plus+ Multi-Gas Detectors, 0 to 100% LEL C5H12TRP
Made to work with Triple Plus+ multi-gas detectors, this gas sensor tests for pentane gas and features a range of 0 to 100% LEL.




Crowcon C3H8TRP Propane Gas Sensor for Triple Plus+ Multi-Gas Detectors, 0 to 100% LEL C3H8TRP
Made to work with Triple Plus+ multi-gas detectors, this gas sensor tests for propane gas and features a range of 0 to 100% LEL.




Crowcon COTRPUSA Carbon Monoxide Gas Sensor for Triple Plus+ Gas Detectors, 0 to 500ppm, US Alarms COTRPUSA
With a 0 to 500ppm measurement range, this carbon monoxide gas sensor is designed to check for carbon monoxide levels when used with your compatible Triple Plus+ gas detector. The sensor features a US alarm.




Crowcon COTRPAUS Carbon Monoxide Gas Sensor for Triple Plus+ Gas Detectors, 0 to 500ppm, AUS Alarm COTRPAUS
With a 0 to 500ppm measurement range, this carbon monoxide gas sensor is designed to check for carbon monoxide levels when used with your compatible Triple Plus+ gas detector. The sensor features an AUS alarm.




Crowcon COTRPCOMP Carbon Monoxide Gas Sensor for Triple Plus+ Gas Detectors, 0 to 500ppm, H2 Compensated COTRPCOMP
With a 0 to 500ppm measurement range, this carbon monoxide (H2 compensated) gas sensor is designed to check for carbon monoxide levels when used with your compatible Triple Plus+ gas detector.




Crowcon HCLTRP Hydrogen Chloride Gas Sensor for Triple Plus+ Multi-Gas Detectors, 0 to 10ppm HCLTRP
Made to work with your Triple Plus+ multi-gas detector, this gas sensor detects hydrogen chloride gas at levels from 0 to 10ppm.




Crowcon CL2TRP Chlorine Gas Sensor for Triple Plus+ Gas Detectors, 0 to 5ppm CL2TRP
With a 0 to 5ppm measurement range, this chlorine gas sensor is designed to check for chlorine levels when used with your compatible Triple Plus+ gas detector.




Crowcon CL2TRPUK Chlorine Gas Sensor for Triple Plus+ Gas Detectors, 0 to 5ppm, UK Alarm CL2TRPUK
With a 0 to 5ppm measurement range, this chlorine gas sensor is designed to check for chlorine levels when used with your compatible Triple Plus+ gas detector. The sensor features a UK alarm.




Crowcon NO2TRP Nitrogen Dioxide Gas Sensor for Triple Plus+ Multi-Gas Detectors, 0 to 10ppm NO2TRP
Made to work with your Triple Plus+ multi-gas detector, this gas sensor detects nitrogen dioxide gas at levels from 0 to 10ppm.




Crowcon NOTRP Nitric Oxide Gas Sensor for Triple Plus+ Multi-Gas Detectors, 0 to 100ppm NOTRP
Made to work with your Triple Plus+ multi-gas detector, this gas sensor detects nitric oxide gas at levels from 0 to 100ppm.




Crowcon H2TRPPPM Hydrogen Gas Sensor for Triple Plus+ Multi-Gas Detectors, 0 to 2,000ppm H2TRPPPM
Made to work with your Triple Plus+ multi-gas detector, this gas sensor detects hydrogen gas at levels from 0 to 2,000ppm.




Crowcon SO2TRP Sulphur Dioxide Gas Sensor with Hydrogen Sulphide Immune for Triple Plus+ Multi-Gas Detectors, 0 to 10ppm SO2TRP
Made to work with your Triple Plus+ multi-gas detector, this gas sensor detects sulphur dioxide gas at levels from 0 to 10ppm.




Crowcon H2STRP1000 Hydrogen Sulphide Gas Sensor for Triple Plus+ Multi-Gas Detectors, 0 to 1,000ppm H2STRP1000
Made to work with your Triple Plus+ multi-gas detector, this gas sensor detects hydrogen sulphide gas at levels from 0 to 1,000ppm.




Crowcon H2STRPAUS Hydrogen Sulphide Gas Sensor for Triple Plus+ Multi-Gas Detectors, 0 to 50ppm, AUS Alarms H2STRPAUS
Made to work with your Triple Plus+ multi-gas detector, this gas sensor detects hydrogen sulphide gas at levels from 0 to 50ppm and has AUS alarms built in.




Crowcon H2STRPUSA Hydrogen Sulphide Gas Sensor for Triple Plus+ Multi-Gas Detectors, 0 to 50ppm, US Alarms H2STRPUSA
Made to work with your Triple Plus+ multi-gas detector, this gas sensor detects hydrogen sulphide gas at levels from 0 to 50ppm and has US alarms built in.




Crowcon H2STRPALM Hydrogen Sulphide Gas Sensor for Triple Plus+ Multi-Gas Detectors, 0 to 50ppm, Almeer (0 to 200ppm) H2STRPALM
Made to work with your Triple Plus+ multi-gas detector, this gas sensor detects hydrogen sulphide gas at levels from 0 to 50ppm.




Crowcon H2STRP Hydrogen Sulphide Gas Sensor for Triple Plus+ Multi-Gas Detectors, 0 to 50ppm H2STRP
Made to work with your Triple Plus+ multi-gas detector, this gas sensor detects hydrogen sulphide gas at levels from 0 to 50ppm.




Crowcon CH4TRP Methane Gas Sensor for Triple Plus+ Gas Detectors, 0 to 100% LEL CH4TRP
With a 0 to 100% LEL measurement range, this methane gas sensor is designed to check for methane levels when used with your compatible Triple Plus+ gas detector.




Crowcon C03141 Drop Line for Triple Plus+ Multi-Gas Detectors, 19.69ft C03141
Undertake pre-entry checks with your existing Triple Plus+ multi-gas detector with help from this 19.69ft (6m) drop line.




Crowcon FIL29001 In-Line Water Trap/Particulate Filter for Triple Plus+ and Triple Plus+ IR Gas Detectors FIL29001
Safeguard your Triple Plus+ or Triple Plus+ IR multi-gas detector from particles and moisture with help from this in-line water trap/particulate filter.




Crowcon M04032/X Standard Sampling Hose for Triple Plus+ and Triple Plus+ IR Multi-Gas Detectors M04032/X
Supplied by the meter, this standard sampling hose works with Triple Plus+ and Triple Plus+ IR multi-gas detectors.




Crowcon C01757 Telescopic Sample Probe for Triple Plus+ and Triple Plus+ IR Multi-Gas Detectors, 33.46 to 61.02in C01757
Use this telescoping sample probe, which extends from 33.46 to 61.02in (85 to 155cm), with your existing Triple Plus+ or Triple Plus+ IR multi-gas detector. The sample probe allows you to sample remotely, such as into chambers during re-entry checks.




Crowcon C01097 Rigid Sample Probe for Triple Plus+ And Triple Plus+ IR Multi-Gas Detectors, 3.28ft C01097
Designed for sampling remotely, including during re-entry checks, this rigid sample probe works with Triple Plus+ and Triple Plus+ IR multi-gas detectors.




Crowcon M05809 Top Label Protective Film for Triple Plus+ and Triple Plus+ IR Multi-Gas Detectors M05809
Compatible with Triple Plus+ and Triple Plus+ IR multi-gas detectors, this self-adhesive film provides extra protection to your unit's keypad and display.




Crowcon C01325 Baffle Plate for Triple Plus+ and Triple Plus+ IR Multi-Gas Detectors C01325
Use this baffle plate with your existing Triple Plus+ or Triple Plus+ IR multi-gas detector. The baffle plate helps protect sensor apertures in extreme conditions, including by helping to reduce splash and sand ingress.




Crowcon C01323 Shoulder Strap for Triple Plus+ Multi-Gas Detectors C01323
Use this shoulder strap with your existing Triple Plus+ multi-gas detector. The strap includes slips for simple attachment.




Crowcon C01007 Carrying Case and Belt for Triple Plus+ And Triple Plus+ IR Multi-Gas Detectors C01007
Easily transport your Triple Plus+ or Triple Plus+ IR multi-gas detector with this carrying case and belt combo.




Crowcon C01685 Aspirator Kit with Pouch for Triple Plus+ and Triple Plus+ IR Multi-Gas Detectors C01685
Use this kit, which includes an aspirator bulb, a flow plate and 6.56 (2m) of standard sampling hose, with your existing Triple Plus+ or Triple Plus+ IR multi-gas detector. The kit helps enable manual sampling.




Poser une question sur le Crowcon TRP-02-XX-Z Triple Plus+ Pumped 3-Gas Detector, IR CH4 %LEL/O2/H2S

Plus de produits Crowcon