This stainless-steel heat exchanger can be used as either a condenser or a sub-cooler to significantly reduce temperature and pressure from recovered refrigerant or condensable gases in a permanently installed recovery system.
This stainless-steel heat exchanger can be used as either a condenser or a sub-cooler to significantly reduce temperature and pressure from recovered refrigerant or condensable gases in a permanently installed recovery system.
This stainless steel heat exchanger dramatically improves recovery speed and high ambient temperature performance on all commercially available major brand recovery machines also extending the life of the equipment.
Features
| Inlet / Outlet Port | 1/4 SAE 45D flare fittings, 304SS |
| Heat Exchanger | Equivalent to 18ft (5.49m) of 1/4 OD 304SS tubing |
| Maximum Working Pressure | 800psig |
| Burst Pressure | 4000psig |
| Housing | Aluminum vented shell with painted die-cast end plates |
| Inlet / Outlet Port | 1/4 SAE 45D flare fittings, 304SS |
| Heat Exchanger | Equivalent to 18ft (5.49m) of 1/4 OD 304SS tubing |
| Maximum Working Pressure | 800psig |
| Burst Pressure | 4000psig |
| Housing | Aluminum vented shell with painted die-cast end plates |
