Bio Plas 4167SLS50 offre

Designed for use in biotechnology laboratories such as preparing samples for thermal cycling or whenever complete sample recovery is important. The Siliconized G-Tube ® Flat Top Microcentrifuge Tube is moulded from a siliconized virgin polypropylene that exhibits extremely low surface adhesion providing maximum sample recovery

The Siliconized G-Tube is built for high impact usage and will withstand over 30,000 x g when spun. Thicker walls make this the tube of choice for extreme stress, high spinning speeds, boiling, chemical resistance and freezing. Will withstand temperature ranges of -80 to 121°C (- 112 to 250°F).

Caractéristiques

• No special locking cap devices needed
• Safe sample deposit
• Highest impact tube strength with the smoothest interior surface
• Lid Closure: The flat top lid forms an extra-tight seal that will not come open during processing. Yet, it's easy to open with thumb pressure or our handy MicroTube Tool (Model 4000)
• Inscribing Patches: All flat top tubes have a textured writing surface on top of the caps. The 1.5mL and 2.0mL tubes have an additional textured writing surface on the side of the tubes.
• Graduation: The 1.5ml tubes and 2.0ml tubes are graduated every 0.1ml
• Finish: The interior has the smoothest, most highly polished surface of any tube on the market. The walls are non-wettable, preventing liquids from adhering to the sides.
• Easy needle access through the piercing port in the exact centre of the cap

Applications

Ideal for the following applications: Microbiology, Nucleic Acid, Aqueous Samples, Specimen Distribution