Equipped with a 0.45 HP motor, this pneumatic angle die grinder reaches a no-load speed of 18,000 RPM for material removal in confined spaces. It uses a 1/4-inch collet and requires 3 CFM of air through a 1/4-inch NPT inlet to maintain consistent performance. The 1.7-pound (0.8 kg) design incorporates a polyurethane grip that reduces vibration to less than 0.1 m/s² while keeping sound levels at 80 dBA.
Equipped with a 0.45 HP motor, this pneumatic angle die grinder reaches a no-load speed of 18,000 RPM for material removal in confined spaces. It uses a 1/4-inch collet and requires 3 CFM of air through a 1/4-inch NPT inlet to maintain consistent performance. The 1.7-pound (0.8 kg) design incorporates a polyurethane grip that reduces vibration to less than 0.1 m/s² while keeping sound levels at 80 dBA.
Air Consumption: 3 CFM Air Inlet: 1/4" (6.4 mm) NPT Sound Level (dBA): 80 Collet Size: 1/4" (6.4 mm) No Load RPM: 18000 Hose Diameter: 3/8" (9.5 mm) Vibration Less Than: 0.1 m/s² Horsepower: 0.45 HP Net Weight lbs.: 1.7 lbs (0.8 kg) (0.77 kg) Polyurethane grip reduces operator fatigue and vibration Power/speed regulator allows for easy rpm adjustment Twin-bearing design for smooth operation
Caractéristiques
| Air Consumption | 3 CFM |
| Air Inlet | 1/4" (6.4 mm) NPT |
| Sound Level | 80 dBA |
| Collet Size | 1/4" (6.4 mm) |
| No Load Rpm | 18000 |
| Hose Diameter | 3/8" (9.5 mm) |
| Vibration | Less Than 0.1 m/s² |
| Horsepower | 0.45 HP |
| Net Weight | 1.7 lbs (0.8 kg) |
| Air Consumption | 3 CFM |
| Air Inlet | 1/4" (6.4 mm) NPT |
| Sound Level | 80 dBA |
| Collet Size | 1/4" (6.4 mm) |
| No Load Rpm | 18000 |
| Hose Diameter | 3/8" (9.5 mm) |
| Vibration | Less Than 0.1 m/s² |
| Horsepower | 0.45 HP |
| Net Weight | 1.7 lbs (0.8 kg) |
