Pro2TK is a kit with 4 essential tools for testing and maintaining 2-wire irrigation systems all in one kit. The Armada Pro2TK 2-Wire Irrigation System Tool Kit includes Pro50 Digital Tester, Pro95i Milliamp Clamp Multimeter, Pro55 Stainless Steel Wire strippers, and Pro210F Tone Probe all in one easily transported professional hard carrying case with foam inserts for a custom fit for the testers and a mesh pouch to keep wipes, wire nuts, cords and other accessories.
Pro2TK is a kit with 4 essential tools for testing and maintaining 2-wire irrigation systems all in one kit. The Armada Pro2TK 2-Wire Irrigation System Tool Kit includes Pro50 Digital Tester, Pro95i Milliamp Clamp Multimeter, Pro55 Stainless Steel Wire strippers, and Pro210F Tone Probe all in one easily transported professional hard carrying case with foam inserts for a custom fit for the testers and a mesh pouch to keep wipes, wire nuts, cords and other accessories.
The Armada Pro2TK is a kit with 4 essential tools for testing and maintaining 2-wire irrigation systems all in one kit. The Armada Pro2TK 2-Wire Irrigation System Tool Kit includes Pro50 Digital Tester, Pro95i Milliamp Clamp Multimeter, Pro55 Stainless Steel Wire strippers, and Pro210F Tone Probe all in one easily transported professional hard carrying case with foam inserts for a custom fit for the testers and a mesh pouch to keep wipes, wire nuts, cords and other accessories.
Caractéristiques
Pro50 Digital Tester
The Pro50 Digital Tester is a digital irrigational system tester for testing multi-wire electrically controlled irrigation systems, verifying controller functions, wiring continuity, and valve solenoid operation. The Pro50 digital irrigation tester is designed for users who may need to test both conventional AC systems and DC (9-volt battery) operated systems. In the AC mode, the tester measures and activates valve circuits using 24 volts, while in the DC mode, the tester uses the same signals as popular 9-volt battery-operated controllers to activate DC latching solenoids. The Pro50™ will “chatter” valves in both modes. The Pro50™ digital capabilities allow it to test AC, DC, high resistance, and any low-voltage solenoid out there, as well as power up a 2-wire system.
Pro95i Milliamp Clamp Multimeter
The Pro95i is an advanced AC leakage clamp multimeter for 2-wire troubleshooting. The Pro95i milliamp clamp multimeter makes it possible to diagnose cable and equipment faults in 2-wire systems without opening splices. The Pro95i measures AC line current with a resolution of 1 microampere simply by clamping over wires in a control cable. In addition, VAC, VDC, and ohm measurements are available. All utilize a built-in auto-ranging function for easy use.
Pro55 Stainless Steel Wire Strippers
The Pro55 is a stainless wire stripper that provides clean cuts through tough wires making your job smooth and easy. Water is no problem for the stainless composition of the Pro55. The stainless-steel feature gives the Armada Pro55 Stainless Steel Wire Strippers long life and resistance against wear and tear in any field of work. The easy-to-grip cushioned grips provide for swift and quick movement while giving your hands some comfort. The precision holes allow for a perfect strip on each wire and can be used on wire gauges 10-22 AWG (2.8-0.8 mm). The plier jaws have a crimping jaw for electrical splices and trims 8-32 and 6-32 steel bolts.
Pro210F Tone Probe
The Armada Pro210F Filter Tone Probe is an advanced inductive probe for identifying wire termination points in conjunction with the Pro50™ transmitting in tone mode. Made for user ease, the Armada Pro210F can be held in one hand and operated with the simple touch of a single button, and with both high sensitivity and AC noise reduction, can pick up tones in any sort of place, even in areas with high interference. The Pro210F features two modes of operation: normal and rejection modes. The Pro210F automatically defaults to normal mode. However, to limit background AC interference, use the rejection mode.
Scrubbuz Silicone Sealant Gel Removing Wipes
In addition, the Pro2TK 2- Wire Irrigation System Tester Kit also includes some test leads and one package of Scrubbuz™ Silicone Sealant Gel Removing Wipes, a super-size, special dual-texture cloth used to remove silicone gunk. These cloths have a scrubby side to provide the scrubbing power, and the other side finishes the clean with a smooth and soft polish.
Applications
| Pro50 | |
| Connections | Removable Standard Multimeter Alligator Leads. 24 inch, Red and Black. Cat IV, 600v. |
| Tone Tracing Transmit Power | +6 dBm (600 ohms) |
| Line Transmit Frequency | 900 Hz alternating with 1050 Hz, at a 2 Hz rate |
| Line Voltage Protection | 120 V AC or 120 V DC |
| AC Solenoid Operation | 24 Volts AC |
| DC Latching Solenoid Operation | +9 volt DC and -9 volt DC pulses 40 milliseconds |
| Line Condition Check | Good, Open, Short |
| Test Range | 3,000 feet (1 km) over 18 ga (1 mm) cable |
| Built-in Multimeter Tests | AC or DC to 40 volts, auto-ranging |
| Electrical Resistance | from 0 to 40 kilohms, auto-ranging |
| Display | 0.5 x 2" (12 x 50 mm) LCD |
| Battery Type | Four (4) AA or LR6 cells (not included) |
| Battery saving Timeout | 30 minutes |
| Operating Conditions | 32 to 120°F (0 to 50°C) |
| Unit Size | 7 x 3 x 1.5" (175 x 80 x 35 mm |
| Weight Including Test Leads | 8.5 ounces (240 g) without batteries |
| Pro210F™ Filter Tone Probe | |
| General Specifications | AC Rejection or Broadband Modes LED Headlight Volume Control 4 AA Batteries for 250+ Hours of Operation Headset Jack Metal/Plastic Tip |
| Pro95i | |
| Current | Range from 5 microamperes to 60 amperes AC |
| Current | Resolution to 1 microampere |
| Voltage | V AC to 600V V DC to 600V |
| Resistance | Automatically reads 0 to 600 Kohms,with selectable beep short circuit check |
| Weight | Less than 1 lb with packaging |
| Maximum Jaw Opening | 0.9 in (23 mm) |
| Safety Approval | CE, UL |
| Warranty | 1 year |
| Pro55™ | |
| Wire type | AWG/ Wire |
| Min AWG Wire Diameter | 10 |
| Max AWG Wire Diameter | 22 |
| Handle Type | Spring Loaded |
| Weight | less than 1 pound |
| Pro50 | |
| Connections | Removable Standard Multimeter Alligator Leads. 24 inch, Red and Black. Cat IV, 600v. |
| Tone Tracing Transmit Power | +6 dBm (600 ohms) |
| Line Transmit Frequency | 900 Hz alternating with 1050 Hz, at a 2 Hz rate |
| Line Voltage Protection | 120 V AC or 120 V DC |
| AC Solenoid Operation | 24 Volts AC |
| DC Latching Solenoid Operation | +9 volt DC and -9 volt DC pulses 40 milliseconds |
| Line Condition Check | Good, Open, Short |
| Test Range | 3,000 feet (1 km) over 18 ga (1 mm) cable |
| Built-in Multimeter Tests | AC or DC to 40 volts, auto-ranging |
| Electrical Resistance | from 0 to 40 kilohms, auto-ranging |
| Display | 0.5 x 2" (12 x 50 mm) LCD |
| Battery Type | Four (4) AA or LR6 cells (not included) |
| Battery saving Timeout | 30 minutes |
| Operating Conditions | 32 to 120°F (0 to 50°C) |
| Unit Size | 7 x 3 x 1.5" (175 x 80 x 35 mm |
| Weight Including Test Leads | 8.5 ounces (240 g) without batteries |
| Pro210F™ Filter Tone Probe | |
| General Specifications | AC Rejection or Broadband Modes LED Headlight Volume Control 4 AA Batteries for 250+ Hours of Operation Headset Jack Metal/Plastic Tip |
| Pro95i | |
| Current | Range from 5 microamperes to 60 amperes AC |
| Current | Resolution to 1 microampere |
| Voltage | V AC to 600V V DC to 600V |
| Resistance | Automatically reads 0 to 600 Kohms,with selectable beep short circuit check |
| Weight | Less than 1 lb with packaging |
| Maximum Jaw Opening | 0.9 in (23 mm) |
| Safety Approval | CE, UL |
| Warranty | 1 year |
| Pro55™ | |
| Wire type | AWG/ Wire |
| Min AWG Wire Diameter | 10 |
| Max AWG Wire Diameter | 22 |
| Handle Type | Spring Loaded |
| Weight | less than 1 pound |
