Fièrement québécois

Gestion et propriété 100% de chez nous

évaluation des clients

4.7/5 ÉTOILES

3977 COMMENTAIRES

évaluation des clients

4.7/5 ÉTOILES

3977 COMMENTAIRES

Amprobe AT-2004-A Advanced Wire Tracer

Modèle: AT-2004-A | CUP: 095969695381

Amprobe AT-2004-A Advanced Wire Tracer-

Télécharger: datasheet manual

Plus de produits Amprobe

Demander à un expert

Amprobe AT-2004-A Advanced Wire Tracer

Modèle: AT-2004-A | CUP: 095969695381

Used to trace live, de-energized, or open (broken) wires behind walls that are up to 13 feet (4m) thick, safe to use in data centers.

Used to trace live, de-energized, or open (broken) wires behind walls that are up to 13 feet (4m) thick, safe to use in data centers.

Discontinué!

Ce produit a été discontinué et n’est plus disponible.
Voici le produit de remplacement direct :

Fluke 2052 Ensemble de traceur de câbles, CAT IV 600 V, 600 V CA/CC-

Fluke 2052 Ensemble de traceur de câbles, CAT IV 600 V, 600 V CA/CC

Modèle: 2052

Conçue pour assurer votre sécurité, cet ensemble de traceur de câbles avancé permet de dépanner avec précision et en toute sécurité les fils sous tension/hors tension dans les environnements résidentiels, commerciaux et industriels jusqu'à CAT IV 600 V. De plus, l'ensemble est livré avec un récepteur, un transmetteur, une pince de courant CA, un ensemble de fil d'essai et une mallette de transport.

En savoir plus

Amprobe AT-2004-A Offers

Features

  • Detects and traces wires buried in walls and floors, up to 13 feet (4m) deep, as well as in plastic conduit, cable shield and computer cables
  • Traces energized wires and locates breakers without interrupting power
  • Traces de-energized wires (continuity and grounded wire) and pinpoints shorts and ground faults
  • Traces de-energized open (broken or disconnected) wires and locates the point where the wire is broken
  • Includes a clamp-on attachment for injecting a signal into wires when bare wire access isn't available
  • Does not interfere with sensitive electronic equipment, such as in hospitals and data centers

Amprobe AT-2004-A Specifications

General
Operating Temperature 0 to 120°F (-18°C to 49°C)
Storage Temperature -40 to 150°F (-40° to 66°C)
Case Material ABS
Case Size 11" x 15.5" x 4" (39.4 x 27.9 x 10.2 cm)
R2000 Receiver
Detectors Electromagnetic coil pickup for short mode
Electrostatic plate pickup for open mode
Sensitivity Selection x1, x10, x100 course gain adjustment; 0-10 fine adjustment
Short Mode Performance Over 20 feet in air under test conditions
Open Mode Performance Over 12 feet in air under test conditions
60Hz Rejection 120 db
Power Source 9V alkaline battery
Display 10 LED's with chroma filter lens
S2600 Load Signal Generator
Operating Voltage 9-600 volts AC or DC
Operating Frequency 32.768 KHz
Duty Cycle Transmits 2 pulses with a duration of 0.0625 every 0.5 seconds
Current Output Low mode: 35 mA peak, 4mA average
High mode: 70 mA peal, 6mA average
Fuse Fast acting 250mA @ 660V (6mm x 32mm)Cat. No. 660.25-6X32
T2200 Transmitter
Operating Frequency 32.768 KHz
Duty Cycle Transmits 2 pulses with a duration of 0.0625 every 0.5 seconds
Fuse Fast acting 2A @ 250V 3AG .25" x 1.25" Cat No. 2502-6x32
Battery 9V alkaline - 24V jack will accept battery pack accessory (B2024 or B2025)
Signal Output 9V supply / 24V supply
High Setting 1A, 31V / 3A, 105V
Medium Setting 1.8A, 13V / 6A, 45V
Low Setting 3A, 6.5V / 10A, 22V
A2201 Clamp-on Transmitter Accessory
Operating Frequency 32.768 KHz as supplied by the T2200
Case Breakdown Voltage 3000 V
Maximum Wiresize 2000 MCM or 2" dia. cable
Cliquer ici pour toutes les spécifications du Amprobe AT-2004-A

What's Included with the Amprobe AT-2004-A

  • Amprobe AT-2004-A Advanced Wire Tracer
  • R-2000 Receiver
  • S-2600-A Transmitter 9-300 V
  • T-2200 Transmitter for open tracing
  • A2201CE Clamp-on transmitter accessory
  • C2901 Cordset 110 volt plug to banana plugs
  • C2902 Cordset alligator clips to banana plugs
  • Required batteries
datasheet pour le Amprobe AT-2004-A Advanced Wire Tracer manual pour le Amprobe AT-2004-A Advanced Wire Tracer

Poser une question sur le Amprobe AT-2004-A Advanced Wire Tracer

Amprobe AT-2004-A Offers

Features

  • Detects and traces wires buried in walls and floors, up to 13 feet (4m) deep, as well as in plastic conduit, cable shield and computer cables
  • Traces energized wires and locates breakers without interrupting power
  • Traces de-energized wires (continuity and grounded wire) and pinpoints shorts and ground faults
  • Traces de-energized open (broken or disconnected) wires and locates the point where the wire is broken
  • Includes a clamp-on attachment for injecting a signal into wires when bare wire access isn't available
  • Does not interfere with sensitive electronic equipment, such as in hospitals and data centers
En savoir plus...

Amprobe AT-2004-A Specifications

General
Operating Temperature 0 to 120°F (-18°C to 49°C)
Storage Temperature -40 to 150°F (-40° to 66°C)
Case Material ABS
Case Size 11" x 15.5" x 4" (39.4 x 27.9 x 10.2 cm)
R2000 Receiver
Detectors Electromagnetic coil pickup for short mode
Electrostatic plate pickup for open mode
Sensitivity Selection x1, x10, x100 course gain adjustment; 0-10 fine adjustment
Short Mode Performance Over 20 feet in air under test conditions
Open Mode Performance Over 12 feet in air under test conditions
60Hz Rejection 120 db
Power Source 9V alkaline battery
Display 10 LED's with chroma filter lens
S2600 Load Signal Generator
Operating Voltage 9-600 volts AC or DC
Operating Frequency 32.768 KHz
Duty Cycle Transmits 2 pulses with a duration of 0.0625 every 0.5 seconds
Current Output Low mode: 35 mA peak, 4mA average
High mode: 70 mA peal, 6mA average
Fuse Fast acting 250mA @ 660V (6mm x 32mm)Cat. No. 660.25-6X32
T2200 Transmitter
Operating Frequency 32.768 KHz
Duty Cycle Transmits 2 pulses with a duration of 0.0625 every 0.5 seconds
Fuse Fast acting 2A @ 250V 3AG .25" x 1.25" Cat No. 2502-6x32
Battery 9V alkaline - 24V jack will accept battery pack accessory (B2024 or B2025)
Signal Output 9V supply / 24V supply
High Setting 1A, 31V / 3A, 105V
Medium Setting 1.8A, 13V / 6A, 45V
Low Setting 3A, 6.5V / 10A, 22V
A2201 Clamp-on Transmitter Accessory
Operating Frequency 32.768 KHz as supplied by the T2200
Case Breakdown Voltage 3000 V
Maximum Wiresize 2000 MCM or 2" dia. cable
Cliquer ici pour toutes les spécifications du Amprobe AT-2004-A

What's Included with the Amprobe AT-2004-A

  • Amprobe AT-2004-A Advanced Wire Tracer
  • R-2000 Receiver
  • S-2600-A Transmitter 9-300 V
  • T-2200 Transmitter for open tracing
  • A2201CE Clamp-on transmitter accessory
  • C2901 Cordset 110 volt plug to banana plugs
  • C2902 Cordset alligator clips to banana plugs
  • Required batteries
datasheet pour le Amprobe AT-2004-A Advanced Wire Tracer manual pour le Amprobe AT-2004-A Advanced Wire Tracer

Poser une question sur le Amprobe AT-2004-A Advanced Wire Tracer

Plus de produits Amprobe



  • Nous acceptons ces méthodes de paiement:
  • Visa, Master Card, Discover, American Express & PayPal
  • Nous acceptons également les virements électroniques / TEF, les chèques et les bons de commande avec approbation de crédit. Les méthodes de paiement acceptées varient selon les pays.