A compact mA loop signal calibrator, that allows you to calibrate or measure mA as well as loop voltage. The unit is easy-to-use, with an intuitive interface and comprehensive ramp and step functions.
A compact mA loop signal calibrator, that allows you to calibrate or measure mA as well as loop voltage. The unit is easy-to-use, with an intuitive interface and comprehensive ramp and step functions.
Discontinué!
Ce produit a été discontinué et n’est plus disponible.
Il n’y a pas de remplacement direct, mais nous vous recommandons:
Vous ne trouvez pas ce que vous cherchez? Nous ferons une recherche et vous aiderons à trouver ce dont vous avez besoin.
Caractéristiques
Applications
| Current Measure, Source and Sink | |
| Range | 0 to 24 mA |
| Span | 0 to 24 or 4 to 20 mA |
| Accuracy | ±0.01% RDG + 2 μA |
| mA resolution | 1 μA |
| Over Current Protection | 28 mA |
| Hart Resistor, Software On/Off | 250 Ω |
| Loop Drive Capacity | No HART resistor: 1200 Ω With HART resistor: 950 Ω |
| Loop Supply | 24 VDC ±5% |
| Voltage Measure | |
| Range | 0 to 30 VDC |
| Accuracy | ±0.01% RDG + 2 mV |
| Voltage Resolution | 1 mV |
| Over Voltage Protection | 240 VAC |
| Auto Ramp & Step | |
| Auto Ramp Time | 5 to 300 sec |
| Auto Step Time | 5 to 300 sec |
| Step Size | 25%/5 steps |
| Valve Test | |
| Auto Step Time | 5 to 300 sec |
| Number of Steps | 9 |
| Range | -1.25 to 101.25% |
| General Specifications | |
| Operating Temperature | 14 to 131°F (-10 to 55°C) |
| Storage Temperature | -4 to 140°F (-20 to 60°C) |
| Humidity Range | 10 to 95% RH, non-condensing |
| Display | Resolution: 128 x 64 pixels Digit size: 0.34" (8.6 mm) LED backlight |
| Power Supply | Battery type: 6 x AAA batteries, Alkaline, Lithium or NiMH Life: Approximately 40 hours |
| Dimensions | 6 x 3.6 x 1.3" (150 x 90 x 30 mm) |
| Weight | 9.5 oz (0.3 kg) |
| Certifications | CE - EMC EN 61326, ANNEX A |
| Current Measure, Source and Sink | |
| Range | 0 to 24 mA |
| Span | 0 to 24 or 4 to 20 mA |
| Accuracy | ±0.01% RDG + 2 μA |
| mA resolution | 1 μA |
| Over Current Protection | 28 mA |
| Hart Resistor, Software On/Off | 250 Ω |
| Loop Drive Capacity | No HART resistor: 1200 Ω With HART resistor: 950 Ω |
| Loop Supply | 24 VDC ±5% |
| Voltage Measure | |
| Range | 0 to 30 VDC |
| Accuracy | ±0.01% RDG + 2 mV |
| Voltage Resolution | 1 mV |
| Over Voltage Protection | 240 VAC |
| Auto Ramp & Step | |
| Auto Ramp Time | 5 to 300 sec |
| Auto Step Time | 5 to 300 sec |
| Step Size | 25%/5 steps |
| Valve Test | |
| Auto Step Time | 5 to 300 sec |
| Number of Steps | 9 |
| Range | -1.25 to 101.25% |
| General Specifications | |
| Operating Temperature | 14 to 131°F (-10 to 55°C) |
| Storage Temperature | -4 to 140°F (-20 to 60°C) |
| Humidity Range | 10 to 95% RH, non-condensing |
| Display | Resolution: 128 x 64 pixels Digit size: 0.34" (8.6 mm) LED backlight |
| Power Supply | Battery type: 6 x AAA batteries, Alkaline, Lithium or NiMH Life: Approximately 40 hours |
| Dimensions | 6 x 3.6 x 1.3" (150 x 90 x 30 mm) |
| Weight | 9.5 oz (0.3 kg) |
| Certifications | CE - EMC EN 61326, ANNEX A |
