Small and compact, this current probe is the ideal complement for any multimeter to measure AC currents in low-power secondary or industrial applications. In addition, it features two ranges that offer an excellent resolution for measuring AC intensities from 5 mA to 100 A.
Small and compact, this current probe is the ideal complement for any multimeter to measure AC currents in low-power secondary or industrial applications. In addition, it features two ranges that offer an excellent resolution for measuring AC intensities from 5 mA to 100 A.
Features
Applications
| Nominal Range | 10; 100 AAC |
| Measurement Range | 5 mA to 10 AAC 1 to 100 AAC |
| Transformation Ratio | Voltage output |
| Output Signal | 1 mV/mA, 1 mV/A (10 VAC at 10 A, 100 mVAC at 100 A) |
| Overload | 10 A range: 15 A 100 A range: 150 A |
| Frequency Range | 48 to 500 Hz |
| Load Impedance | ≥1 MΩ |
| Output Termination | 5' (1.5 m) lead with two 4 mm safety banana plugs |
| Temperature | Operating: 14 to 122°F (-10 to 50°C) Storage: -40 to 176°F (-40 to 80°C) |
| Operating Relative Humidity | 0 to 85% RH decreasing linearly above 95°F (35°C) |
| Safety Rating | IEC 61010-2-32: 300 V CAT IV, 600 V CAT III, Pollution Degree 2 |
| Ingress Protection | IP40 |
| Double Insulation | Yes |
| CE Mark | Yes |
| Material | Polycarbonate UL 94 V2 |
| Maximum Conductor Size | ø0.39" (10 mm) |
| Dimensions | 5.12 x 1.5 x 1" (130 x 37 x 25 mm) |
| Weight | 6.35 oz (180 g) |
| Nominal Range | 10; 100 AAC |
| Measurement Range | 5 mA to 10 AAC 1 to 100 AAC |
| Transformation Ratio | Voltage output |
| Output Signal | 1 mV/mA, 1 mV/A (10 VAC at 10 A, 100 mVAC at 100 A) |
| Overload | 10 A range: 15 A 100 A range: 150 A |
| Frequency Range | 48 to 500 Hz |
| Load Impedance | ≥1 MΩ |
| Output Termination | 5' (1.5 m) lead with two 4 mm safety banana plugs |
| Temperature | Operating: 14 to 122°F (-10 to 50°C) Storage: -40 to 176°F (-40 to 80°C) |
| Operating Relative Humidity | 0 to 85% RH decreasing linearly above 95°F (35°C) |
| Safety Rating | IEC 61010-2-32: 300 V CAT IV, 600 V CAT III, Pollution Degree 2 |
| Ingress Protection | IP40 |
| Double Insulation | Yes |
| CE Mark | Yes |
| Material | Polycarbonate UL 94 V2 |
| Maximum Conductor Size | ø0.39" (10 mm) |
| Dimensions | 5.12 x 1.5 x 1" (130 x 37 x 25 mm) |
| Weight | 6.35 oz (180 g) |
