Measures leakage current shunted to ground caused by insulation faults. It enables the operator to locate failures when they occur, or anticipate them before they occur, without shutting down equipment or spending hours troubleshooting. Has a very high sensitivity of differential or leakage current from 500µA.
Measures leakage current shunted to ground caused by insulation faults. It enables the operator to locate failures when they occur, or anticipate them before they occur, without shutting down equipment or spending hours troubleshooting. Has a very high sensitivity of differential or leakage current from 500µA.
Designed specifically for locating low current faults on high current loads. The detector is a sensitive nickel alloy AC current transformer capable of measuring differential or leakage current as low as 500µA, and may be used to measure current up to 400A continuous duty.
The Model 2620 provides two output ranges: 1mV/mA AC or 1mV/A AC. The output leads are terminated with standard 4mm banana plugs capable of interfacing with any standard multimeter. With its 4" jaw opening and range of 500µA to 200A, the Model 2620 provides a versatile way to analyze unbalanced current measurements, leakage values on grounding conductors and ground loop currents.
Applications
| Electrical | |
| Current Range | 500μA to 4A |
| Output Signal | 1mV/mA (4V max) |
| Accuracy | 500μA to 10mA: 3% of Reading ±1mV 10mA to 100mA: 0.5% of Reading ±0.5mV 100mA to 4A: 0.5% of Reading ±0.5mV |
| Phase Shift | 10mA to 100mA: <15° 100mA to 4A: <10° |
| Load Impedance (DMM) | 1MΩ min |
| Frequency Range | 48 to 1000Hz |
| Output Termination | 5 ft (1.5m) Lead with 4mm safety banana plugs |
| Mechanical | |
| Dimensions | 11.22 x 6.89 x 1.77" (285 x 175 x 45mm) |
| Jaw Opening | 4.4" (112mm) |
| Maximum Conductor Size | 4.4" (112mm) |
| Weight | 2.87 lbs (1300g) |
| Electrical | |
| Current Range | 500μA to 4A |
| Output Signal | 1mV/mA (4V max) |
| Accuracy | 500μA to 10mA: 3% of Reading ±1mV 10mA to 100mA: 0.5% of Reading ±0.5mV 100mA to 4A: 0.5% of Reading ±0.5mV |
| Phase Shift | 10mA to 100mA: <15° 100mA to 4A: <10° |
| Load Impedance (DMM) | 1MΩ min |
| Frequency Range | 48 to 1000Hz |
| Output Termination | 5 ft (1.5m) Lead with 4mm safety banana plugs |
| Mechanical | |
| Dimensions | 11.22 x 6.89 x 1.77" (285 x 175 x 45mm) |
| Jaw Opening | 4.4" (112mm) |
| Maximum Conductor Size | 4.4" (112mm) |
| Weight | 2.87 lbs (1300g) |
