The G-150-3A-R is a high precision turbine flowmeter featuring a 1.5" (3.81 cm) tri-clamp connection and 1.5" (3.81 cm) stainless steel sanitary turbine, ensuring reliable fluid measurement. Equipped with an RT14 display, it provides easy-to-read data with default readings in gallons.
The G-150-3A-R is a high precision turbine flowmeter featuring a 1.5" (3.81 cm) tri-clamp connection and 1.5" (3.81 cm) stainless steel sanitary turbine, ensuring reliable fluid measurement. Equipped with an RT14 display, it provides easy-to-read data with default readings in gallons.
The GSCPS Series High Precision Meter is the most accurate of all FLOMEC® Turbine Meters. This meter was designed to meet the strict 3A Sanitary Standards for any food and beverage application.
The GSCPS turbine meter's robust design provides reliable performance while delivering economical operating costs. The internals of the 3A meter are machined and polished to meet 3A self-draining and cleaning requirements (Ra 32). Parts are easily replaceable making lifetime maintenance of the turbine meter a preferred choice
Caractéristiques
Applications
| Design Type | Turbine |
| Fitting Type | Sanitary Clamp |
| Housing Material | 316 Stainless Steel |
| Meter ID | 2" Fitting |
| Flow Range | 17.7–177 GPM (67–670 L/min) |
| Accuracy (Linearity) | ± 0.5% |
| Repeatability | ± 0.1% |
| Pressure Rating | Limited by fitting size, clamp size and temperature. |
| Temperature Range | -22 to 176°F (-30 to 80°C) SIP (1 hr): 285°F (140°C) |
| Typical K-Factor | 340 PPG (90 Pulses/L) |
| Wetted Materials | Housing: 316 stainless steel Bushings & Bearings: PEEK Shaft: 316 Stainless Steel Rotor: CD4MCu Stainless Steel Rotor Supports: 316 Stainless Steel Retaining Rings: 300 Series Stainless Steel |
| Recommended Strainer Size | 18 mesh (1000 μm) |
| Frequency Output | 100–1000 Hz |
| Calibration Report | Comes standard N.I.S.T. – Certification available. |
| Dimensions | 4.594 × 4.87 × 6.95" (11.67 x 12.37 x 17.65 cm) |
| Design Type | Turbine |
| Fitting Type | Sanitary Clamp |
| Housing Material | 316 Stainless Steel |
| Meter ID | 2" Fitting |
| Flow Range | 17.7–177 GPM (67–670 L/min) |
| Accuracy (Linearity) | ± 0.5% |
| Repeatability | ± 0.1% |
| Pressure Rating | Limited by fitting size, clamp size and temperature. |
| Temperature Range | -22 to 176°F (-30 to 80°C) SIP (1 hr): 285°F (140°C) |
| Typical K-Factor | 340 PPG (90 Pulses/L) |
| Wetted Materials | Housing: 316 stainless steel Bushings & Bearings: PEEK Shaft: 316 Stainless Steel Rotor: CD4MCu Stainless Steel Rotor Supports: 316 Stainless Steel Retaining Rings: 300 Series Stainless Steel |
| Recommended Strainer Size | 18 mesh (1000 μm) |
| Frequency Output | 100–1000 Hz |
| Calibration Report | Comes standard N.I.S.T. – Certification available. |
| Dimensions | 4.594 × 4.87 × 6.95" (11.67 x 12.37 x 17.65 cm) |
