Ideal for melt-pressure measurements requiring simple installation, repeatability, and reliability. The melt pressure transducer is a +/- 1.0% sensor that provides the industry-standard 3.33 mV/V signal designed to work with most pressure indicators. Features a ½ to 20 UNF thread for installation in standard transducer mounting holes and can be supplied with a variety of electrical connections and comes equipped with a six-pin bendix connector.
Ideal for melt-pressure measurements requiring simple installation, repeatability, and reliability. The melt pressure transducer is a +/- 1.0% sensor that provides the industry-standard 3.33 mV/V signal designed to work with most pressure indicators. Features a ½ to 20 UNF thread for installation in standard transducer mounting holes and can be supplied with a variety of electrical connections and comes equipped with a six-pin bendix connector.
The melt pressure transducer has an accuracy better than ±0.5%.
Features
Applications
| Pressure Range | 1,000 to 30,000 psi |
| Transducer Configuration | Rigid stem with flexible capillary and temperature sensor |
| Snout Length | 6" (15 cm) |
| Stem Length | 18" (64 cm) Flex |
| Combined Error | ±0.5% FSO, (Including Linearity, Repeatability & Hysteresis) |
| Repeatability | ±0.2% FSO |
| Configuration | Four active arm bonded Wheatstone bridge strain gage |
| Bridge Resistance | Input: 345 Ohms minimum; Output: 350 Ohms ±10% |
| Output | 3.33 mV/V ±2.0% |
| Zero Balance | ±10% full scale |
| Input Voltage | 10 Vdc recommended, 12 Vdc maximum |
| Internal Shunt Calibration (R-Cal) | 80% FSO ±1.0% |
| Insulation Resistance | 1,000 megohms at 50 Vdc |
| Maximum Diaphragm Temperature | 750°F (400°C) |
| Standard Wetted Parts | Dymax coated 15-5 PH SST |
| Pressure Range | 1,000 to 30,000 psi |
| Transducer Configuration | Rigid stem with flexible capillary and temperature sensor |
| Snout Length | 6" (15 cm) |
| Stem Length | 18" (64 cm) Flex |
| Combined Error | ±0.5% FSO, (Including Linearity, Repeatability & Hysteresis) |
| Repeatability | ±0.2% FSO |
| Configuration | Four active arm bonded Wheatstone bridge strain gage |
| Bridge Resistance | Input: 345 Ohms minimum; Output: 350 Ohms ±10% |
| Output | 3.33 mV/V ±2.0% |
| Zero Balance | ±10% full scale |
| Input Voltage | 10 Vdc recommended, 12 Vdc maximum |
| Internal Shunt Calibration (R-Cal) | 80% FSO ±1.0% |
| Insulation Resistance | 1,000 megohms at 50 Vdc |
| Maximum Diaphragm Temperature | 750°F (400°C) |
| Standard Wetted Parts | Dymax coated 15-5 PH SST |
