Fièrement québécois

Gestion et propriété 100% de chez nous

évaluation des clients

4.7/5 ÉTOILES

3932 COMMENTAIRES

évaluation des clients

4.7/5 ÉTOILES

3932 COMMENTAIRES

Amprobe INSP-3 Wiring Inspector Tester

Modèle: INSP-3 | CUP: 095969516181

Amprobe INSP-3 Wiring Inspector Tester-

Télécharger: datasheet manual

Plus de produits Amprobe

Demander à un expert

Amprobe INSP-3 Wiring Inspector Tester

Modèle: INSP-3 | CUP: 095969516181

The rugged wiring inspector tester verifies in seconds whether a building’s wiring (including voltage drop under load) complies with electrical code, saving time by eliminating guesswork.

The rugged wiring inspector tester verifies in seconds whether a building’s wiring (including voltage drop under load) complies with electrical code, saving time by eliminating guesswork.

Discontinué!

Ce produit a été discontinué et n’est plus disponible.

Il n’y a pas de remplacement direct, mais nous vous recommandons:

Extech CB10 AC Circuit Breaker Finder/Receptacle Tester-

Extech CB10 AC Circuit Breaker Finder/Receptacle Tester

Modèle: CB10

Locate circuit breakers and test receptacle wiring with this AC circuit finder/receptacle tester. With a variable sensitivity adjustment to pinpoint correct circuit breakers, this tester allows users to quickly locate 110 to 125 V AC circuit breakers and fuses with audible and visual circuit breaker indications.

En savoir plus

Klein Tools RT310 Testeur de prise à disjoncteur de défaut d'arc ou de fuite de terre-

Klein Tools RT310 Testeur de prise à disjoncteur de défaut d'arc ou de fuite de terre

Modèle: RT310

Le testeur de circuit électrique RT310 teste l'état du câblage du câblage dans une prise électrique et inspecte les appareils équipés d'un disjoncteur de défaut d'arc ou de fuite de terre. Il est conçu pour être utilisé avec les prises électriques de 120 V c.a.

En savoir plus

Vous ne trouvez pas ce que vous cherchez? Nous ferons une recherche et vous aiderons à trouver ce dont vous avez besoin.

Amprobe INSP-3 Wiring Inspector Tester

  • Testing efficiency - relevant test data (voltage, voltage drop, hot and neutral voltage drop, voltage with load, ground impedance) is presented on a single large display to save operator time - no scrolling or switching screens needed
  • Verifies if wiring is tested for load carrying ability that it meets electrical code recommendations for voltage drop under load
  • Meter detects faulty wiring in need of repair without removing outlets cover plates, or panel covers:
    • Faulty splices and connections
    • Incorrect wiring
    • Undersized wiring
    • Faulty GFCIs,
    • Faulty or incorrectly wired AFCIs
    • Incorrect line voltage
    • Poor ground quality
  • User selectable 0, 10,15 and 20 amps loads to verify performance of the electrical system
  • Incorrect wiring or voltage drop test failure is clearly indicated by flashing screen
  • Will not trip circuit breakers or blow fuses during the test
  • Tests GFCI and AFCI operations
  • Check ground quality for safety and ability to support sensitive electronic equipment
  • Measure fault currents
  • Save money and time by eliminating guess work

NOTE: The Inspector™ III does not check the condition of wiring insulation.

Amprobe INSP-3 Specifications

Load Constant 10, 15 or 20 AMP simulation regardless of line voltage
Operating Voltage 95 V AC to 120 V AC
Battery 9 V Alkaline
Fuse ½ Amp, 125 V
Trip GFI: 6.0 mA nominal to trip GFI, 30 mA to trip RCD
AFCI: Up to 8, 120 AMP pulses within ½ second period
Operating Temperature 0 to 50 °C (32 to 120°F)
Accuracy ±2%, ± 2 digits
Cliquer ici pour toutes les spécifications du Amprobe INSP-3

What's included with the Amprobe INSP-3

  • Wiring Inspector Tester
  • Power Cord
  • Carrying Case
  • 9 V Alkaline Battery (Installed)
datasheet pour le Amprobe INSP-3 Wiring Inspector Tester manual pour le Amprobe INSP-3 Wiring Inspector Tester

Poser une question sur le Amprobe INSP-3 Wiring Inspector Tester

Amprobe INSP-3 Wiring Inspector Tester

  • Testing efficiency - relevant test data (voltage, voltage drop, hot and neutral voltage drop, voltage with load, ground impedance) is presented on a single large display to save operator time - no scrolling or switching screens needed
  • Verifies if wiring is tested for load carrying ability that it meets electrical code recommendations for voltage drop under load
  • Meter detects faulty wiring in need of repair without removing outlets cover plates, or panel covers:
    • Faulty splices and connections
    • Incorrect wiring
    • Undersized wiring
    • Faulty GFCIs,
    • Faulty or incorrectly wired AFCIs
    • Incorrect line voltage
    • Poor ground quality
  • User selectable 0, 10,15 and 20 amps loads to verify performance of the electrical system
  • Incorrect wiring or voltage drop test failure is clearly indicated by flashing screen
  • Will not trip circuit breakers or blow fuses during the test
  • Tests GFCI and AFCI operations
  • Check ground quality for safety and ability to support sensitive electronic equipment
  • Measure fault currents
  • Save money and time by eliminating guess work

NOTE: The Inspector™ III does not check the condition of wiring insulation.

En savoir plus...

Amprobe INSP-3 Specifications

Load Constant 10, 15 or 20 AMP simulation regardless of line voltage
Operating Voltage 95 V AC to 120 V AC
Battery 9 V Alkaline
Fuse ½ Amp, 125 V
Trip GFI: 6.0 mA nominal to trip GFI, 30 mA to trip RCD
AFCI: Up to 8, 120 AMP pulses within ½ second period
Operating Temperature 0 to 50 °C (32 to 120°F)
Accuracy ±2%, ± 2 digits
Cliquer ici pour toutes les spécifications du Amprobe INSP-3

What's included with the Amprobe INSP-3

  • Wiring Inspector Tester
  • Power Cord
  • Carrying Case
  • 9 V Alkaline Battery (Installed)
datasheet pour le Amprobe INSP-3 Wiring Inspector Tester manual pour le Amprobe INSP-3 Wiring Inspector Tester

Poser une question sur le Amprobe INSP-3 Wiring Inspector Tester

Plus de produits Amprobe



  • Nous acceptons ces méthodes de paiement:
  • Visa, Master Card, Discover, American Express & PayPal
  • Nous acceptons également les virements électroniques / TEF, les chèques et les bons de commande avec approbation de crédit. Les méthodes de paiement acceptées varient selon les pays.