- Sign In
- |
- Sign Up
- |
- My Quote (0)
- |
- CART (0)
Two-position, non-spring return 120 VAC actuator, delivering 220 lb-in torque, designed for reliable operation of dampers and valves in HVAC and other control systems where a return-to-normal position is not required. This features an auxiliary switch.
Two-position, non-spring return 120 VAC actuator, delivering 220 lb-in torque, designed for reliable operation of dampers and valves in HVAC and other control systems where a return-to-normal position is not required. This features an auxiliary switch.
Features
| Control Circuit | Three wire, SPDT snap acting switch provided by a thermostat, pressure switch, or relay |
| Actuator Type | Electric |
| Shaft Rotation | Unidirectional clockwise 180 when power is applied |
| Auxiliary Switch | 1 SPDT |
| Auxiliary Switch | Adjustable SPDT is standard. Factory set to make (or break) at mid-stroke |
| Mechanical Movement | Rotary |
| Nominal Damper Area | Actuator sizing should be done in accordance with damper manufacturer's specifications |
| Motor Type | Oil immersed motor |
| Shipping and Storage Temperature | -40 to 136°F (-40 to 58°C) |
| Override | Manual override with 5/32 allen wrench |
| Operating Temperature | -40 to 136°F (-40 to 58°C) |
| Humidity Temperature | 5 to 95% RH, non-condensing |
| Locations | NEMA Type 1 NEMA 4 with AM-363 |
| Connections | Coded screw terminals |
| Case | Die cast aluminum with two 1/2" conduit knock-outs on each side |
| Mounting Clearance | Allow 6" (152 mm) clearance above the actuator wiring compartment |
| Mounting Dampers | Any position |
| Mounting Valves | In any upright position with actuator above the center line of the valve body |
| Dimensions | 7 x 5-3/8 x 6-5/16" (178 x 137 x 160 mm) |
| Control Circuit | Three wire, SPDT snap acting switch provided by a thermostat, pressure switch, or relay |
| Actuator Type | Electric |
| Shaft Rotation | Unidirectional clockwise 180 when power is applied |
| Auxiliary Switch | 1 SPDT |
| Auxiliary Switch | Adjustable SPDT is standard. Factory set to make (or break) at mid-stroke |
| Mechanical Movement | Rotary |
| Nominal Damper Area | Actuator sizing should be done in accordance with damper manufacturer's specifications |
| Motor Type | Oil immersed motor |
| Shipping and Storage Temperature | -40 to 136°F (-40 to 58°C) |
| Override | Manual override with 5/32 allen wrench |
| Operating Temperature | -40 to 136°F (-40 to 58°C) |
| Humidity Temperature | 5 to 95% RH, non-condensing |
| Locations | NEMA Type 1 NEMA 4 with AM-363 |
| Connections | Coded screw terminals |
| Case | Die cast aluminum with two 1/2" conduit knock-outs on each side |
| Mounting Clearance | Allow 6" (152 mm) clearance above the actuator wiring compartment |
| Mounting Dampers | Any position |
| Mounting Valves | In any upright position with actuator above the center line of the valve body |
| Dimensions | 7 x 5-3/8 x 6-5/16" (178 x 137 x 160 mm) |
