Instek GLN-5040A Line Impedance Stabilization Network - LISN

Model: GLN-5040A

Be the first to review this product

Instek GLN-5040A Line Impedance Stabilization Network - LISN -

Downloads: manual

More GW Instek Products

Ask an Expert

Instek GLN-5040A Line Impedance Stabilization Network - LISN

Model: GLN-5040A

Be the first to review this product

The Instek GLN-5040A Line Impedance Stabilization Network is used for EMI testing. It provides a stable impedance for the EUT terminals and the reference ground within the conducted emissions range.

Discontinued!

This product has been discontinued and is no longer available. There is no direct replacement. Don't worry, we have some options to help you find what you need:

Visit our EMF Meters category for similar products.

Or let's do a search and help you find what you need:

GW Instek GLN-5040A Offers

The Instek GLN-5040A Line Impedance Stabilization Network is used for EMI testing. It provides a stable impedance for the EUT terminals and the reference ground within the conducted emissions range. The GLN-5040A also isolates the unwanted network signals from the power supply unit and only couples the disturbance voltage of the measured device to the receiver.

Features

EMI testing
Provides stable impedance for EUT terminals and reference ground within conducted emissions range
Isolates unwanted network signals from power supply unit
Only couples disturbance voltage of measured device to receiver
In compliance with standard requirements of CISPR16-1-2
Uses standard BNC output connector with 50 ohm output impedance
Matches any measurement devices such as receivers and spectrum analyzers
Equipped with artificial hand function that simulates handheld type measurement
9kHz and 150kHz high pass filter selection function that allows product to select correct filters according to relevant standard
Suitable for signal phase device conduction (disturbance voltage) measurement

Applications

Laboratories
Production/Manufacturing
Workshops
Research and Development

What's included with the GW Instek GLN-5040A

Line Impedance Stabilization Network
German Standard to GB Socket
BNC Connecting Wire
Adaptor BNC-F to N Type-M
User Instruction Manual
Test Report
Warranty Card

manual for the Instek GLN-5040A Line Impedance Stabilization Network - LISN

Ask a question about Instek GLN-5040A Line Impedance Stabilization Network - LISN

Customer Reviews for the GW Instek GLN-5040A

Description ➕➖

GW Instek GLN-5040A Offers

Features

EMI testing
Provides stable impedance for EUT terminals and reference ground within conducted emissions range
Isolates unwanted network signals from power supply unit
Only couples disturbance voltage of measured device to receiver
In compliance with standard requirements of CISPR16-1-2
Uses standard BNC output connector with 50 ohm output impedance
Matches any measurement devices such as receivers and spectrum analyzers
Equipped with artificial hand function that simulates handheld type measurement
9kHz and 150kHz high pass filter selection function that allows product to select correct filters according to relevant standard
Suitable for signal phase device conduction (disturbance voltage) measurement

Applications