- Sign In
- |
- Sign Up
- |
- My Quote (0)
- |
- CART (0)
LCD-W110 is a digital indicator with backlight for installation directly in a 4-20 mA loop without need for external power. The backlight makes it easy to read and LCD-W110 comes with a high contrast LCD display.
LCD-W110 is a digital indicator with backlight for installation directly in a 4-20 mA loop without need for external power. The backlight makes it easy to read and LCD-W110 comes with a high contrast LCD display.
The indicator is designed for field mounting on wall, pipe or DIN rail and have a rugged and splash proof housing. The scale is easily programmable with push buttons or via NFC communication using the app INOR Connect. A temperature transmitter can be integrated for direct sensor input.
Features
| Type of Display | LCD |
| Input Current | 4-20 mA |
| Maximum Current | 30 mA |
| Minimum Current for Operation | ~3.5 mA |
| Voltage Drop | 4.2 V |
| Display | 7-segment black LCD with clear background |
| Backlight | White LED powered from the 4-20 mA loop |
| Indication Range | 4 digits (-1999 to 9999) |
| Digit Height | 0.7" (17.8 mm) / 0.7″ |
| Decimals | Selectable, 0 to 3 |
| Under Range / Over Range | Flashing symbols Lo (I ≤ 3.6 mA) / HI (I ≥ 21.0 mA) |
| Engineering Units | Set of self-adhesive labels included for units:°C,°F, mA, mV, V, bar, mbar, Pa, kPa, MPa, pH, %, s, ms, μs, mm, cm, m |
| Response Time | Appr. 1 s Power on delay: 5 s and stable after 1 min |
| Temperature Influence | ≤ ±0.01% FS /°C |
| Configuration Method | 3 push buttons or NFC, located on the rear of the display |
| Operation Temperature | -4 to 158°F (-20 to 70°C) |
| Typical Accuracy | 0.05% FS ±1 digit |
| Dimensions | 3.15 x 4.33 x 2.56" (80 x 110 x 65 mm) |
| Protection | IP65 / NEMA 4X |
| Connections | Push-in spring connection, Wire cross section 0.01" (0.25 mm)²-0.06" (-1.5 mm)² AWG 24-16 |
| Cable Entries | 2x cable glands M20x1.5 for cable diameter 0.20-0.51" (5-13 mm) (1x blanking plug included) |
| NAMUR NE 43 Compliance | Yes |
| HART Transparent | Yes |
| Mounting | Wall, 1.38" (35 mm) DIN rail acc. to EN 60715 or 2-2.55" (50-65 mm) pipe with mounting kit |
| Type of Display | LCD |
| Input Current | 4-20 mA |
| Maximum Current | 30 mA |
| Minimum Current for Operation | ~3.5 mA |
| Voltage Drop | 4.2 V |
| Display | 7-segment black LCD with clear background |
| Backlight | White LED powered from the 4-20 mA loop |
| Indication Range | 4 digits (-1999 to 9999) |
| Digit Height | 0.7" (17.8 mm) / 0.7″ |
| Decimals | Selectable, 0 to 3 |
| Under Range / Over Range | Flashing symbols Lo (I ≤ 3.6 mA) / HI (I ≥ 21.0 mA) |
| Engineering Units | Set of self-adhesive labels included for units:°C,°F, mA, mV, V, bar, mbar, Pa, kPa, MPa, pH, %, s, ms, μs, mm, cm, m |
| Response Time | Appr. 1 s Power on delay: 5 s and stable after 1 min |
| Temperature Influence | ≤ ±0.01% FS /°C |
| Configuration Method | 3 push buttons or NFC, located on the rear of the display |
| Operation Temperature | -4 to 158°F (-20 to 70°C) |
| Typical Accuracy | 0.05% FS ±1 digit |
| Dimensions | 3.15 x 4.33 x 2.56" (80 x 110 x 65 mm) |
| Protection | IP65 / NEMA 4X |
| Connections | Push-in spring connection, Wire cross section 0.01" (0.25 mm)²-0.06" (-1.5 mm)² AWG 24-16 |
| Cable Entries | 2x cable glands M20x1.5 for cable diameter 0.20-0.51" (5-13 mm) (1x blanking plug included) |
| NAMUR NE 43 Compliance | Yes |
| HART Transparent | Yes |
| Mounting | Wall, 1.38" (35 mm) DIN rail acc. to EN 60715 or 2-2.55" (50-65 mm) pipe with mounting kit |
