- Sign In
- |
- Sign Up
- |
- My Quote (0)
- |
- CART (0)
This is an adapter to convert mA signals to mV signals (shunt resistor), intended to be mounted on the input side of transmitter IPAQ R330. With the adapter mounted, it gives the possibility to connect mA input signals to the transmitter IPAQ R330.
This is an adapter to convert mA signals to mV signals (shunt resistor), intended to be mounted on the input side of transmitter IPAQ R330. With the adapter mounted, it gives the possibility to connect mA input signals to the transmitter IPAQ R330.
The transmitter will then work as an active isolation transmitter for mA input signals with a 4-20 mA output in a 2 wire connection. It is suitable for direct connection to the input modules of a control system. Thanks to the programmable input range and the low input impedance, it meets almost any need for current signal isolation and load amplification.
| Type | Rail-mounted |
| Input | RTD, TC, mV, ohm |
| Input RTD | Pt100, Pt1000, Ni100, Ni120, Ni1000, Cu10 |
| Input Thermocouple | Type B, C, D, E, J, K, N, R, S, T |
| Type of Transmitter | Digital |
| Output | 4-20 mA |
| Galvanic Isolation | 1500 VAC |
| Measuring Channels | 1 channel |
| Sensor Connection | 2-, 3-, 4-wire connection |
| Power Supply | IPAQ-R330: 8 to 36 VDC IPAQ-R330X: 8 to 30 VDC |
| Approvals | ATEX, IECEx, FM |
| Typical Accuracy | 0.08% of span |
| Accuracy Over Time | Max. drift ±0.02% of span/year |
| Vibration | IEC 60068-2-6, 5 g |
| Runtime Counter | Hour counter for elapsed operational time |
| Simulated Output | Fixed current ouput during a maximum time of 15 min |
| Configuration | ConSoft or INOR Connect |
| Wireless Communication | NFC® and Bluetooth®* |
| Type | Rail-mounted |
| Input | RTD, TC, mV, ohm |
| Input RTD | Pt100, Pt1000, Ni100, Ni120, Ni1000, Cu10 |
| Input Thermocouple | Type B, C, D, E, J, K, N, R, S, T |
| Type of Transmitter | Digital |
| Output | 4-20 mA |
| Galvanic Isolation | 1500 VAC |
| Measuring Channels | 1 channel |
| Sensor Connection | 2-, 3-, 4-wire connection |
| Power Supply | IPAQ-R330: 8 to 36 VDC IPAQ-R330X: 8 to 30 VDC |
| Approvals | ATEX, IECEx, FM |
| Typical Accuracy | 0.08% of span |
| Accuracy Over Time | Max. drift ±0.02% of span/year |
| Vibration | IEC 60068-2-6, 5 g |
| Runtime Counter | Hour counter for elapsed operational time |
| Simulated Output | Fixed current ouput during a maximum time of 15 min |
| Configuration | ConSoft or INOR Connect |
| Wireless Communication | NFC® and Bluetooth®* |
