Hanna HI7061M Offers

Cleaning is a fast and effective routine that should be performed on a regular basis as a preventative measure against using a dirty electrode and to ensure that the junction is not clogged. By simply immersing the electrode in the HI7061M cleaning solution for 15 to 20 minutes will dissolve any mineral deposits or other coatings.

• Specially formulated for cleaning electrodes
• Air tight bottle with tamper-proof seal
• Each bottle marked with lot number and expiration date

Keep in Mind

• In time, particles during routine measurement can contaminate the sensor tip and mishandled and aged solutions can also be affected
• Your meter can still be calibrated even if the electrode sensor tip is not properly cleaned before calibration, if the contamination dissipates, the calibration is no longer valid and the readings are inaccurate
• A proper cleaning and fresh solution ensures the whole surface of the sensor tip is reading correctly, ensuring an accurate calibration