- Sign In
- |
- Sign Up
- |
- My Quote (0)
- |
- CART (0)
Designed to adapt to unique process control needs, the controller features a large backlit display and an intuitive setup interface.
Designed to adapt to unique process control needs, the controller features a large backlit display and an intuitive setup interface.
The HI510 is a versatile process controller, configurable for a wide range of monitoring and control applications. Its digital probe input automatically detects and updates the measured parameter.
his controller supports up to 5 control relays and 4 analog outputs. Relays can be programmed for on/off, proportional, or PID control, or to run cleaning sequences triggered by digital input or schedule. Scalable analog outputs interface with remote devices such as chart recorders, PLCs, or SCADA, and can drive control equipment like dosing pumps and valves with 0/4–20 mA input.
The HI510 includes an RS485 digital output, supporting up to 32 devices on a single line for remote viewing and programming with HI92500 software. The software’s graphical interface allows settings to be adjusted, saved, and transferred to another HI510 controller.
Features
| Name | Universal Process Controller – HI510-0320 – controller with 3 relays and 2 analog outputs |
| Dosing Control | on/off, proportional and PID |
| Dosing Terminals | Up to 5 relays (independently configurable for process variables, Hold & Cleaning functions) Electromechanical relay SPDT and SPST contact outputs. 5A – 250 Vac; 5A – 30 Vdc (resistive load). Fuse protected: 5A, 250V slow blow fuse. |
| Alarm Relay Set Point | Up to 5 relays (independently configurable for process variables, Hold & Cleaning functions)Electromechanical relay SPDT and SPST contact outputs. 5A – 250 Vac; 5A – 30 Vdc (resistive load). Fuse protected: 5A, 250V slow blow fuse. |
| Over Dosing Control | yes |
| System Error | yes |
| Analog Ouput Signal | 2 or 4 independent, galvanically isolated outputs | 0 – 22 mA configurable as: 0 – 20 mA; 4 – 20 mA 22 mA as alarm signal, configurable option |
| Analog Ouput Accuracy | ±2% full scale |
| Digital Input Signal | independent, galvanically isolated inputs (configurable for Hold & Cleaning functions) On state: 5 to 24 Vdc, low or high level active |
| Digital Output Signal | RS485 |
| Backlight | yes |
| Power Consumption | 15VA |
| Enclosure | *Single case ½ DIN, type NEMA4X, IP65 ingress protection |
| Installation Category | II |
| Panel Cutout | 1/2 DIN (brackets ordered seperately) |
| Input Channels | one digital input with RS485 interface |
| pH Electrode | HI10X6 series – pH and Temperature (ordered seperately) |
| ORP Electrode | HI20X4 series – ORP and Temperature (ordered seperately) |
| Logging Type | Interval log, up to 100 files, maximum 8600 records on each stored file. When the maximum limit of 100 stored files is reached, the most recent file will automatically erase the oldest one. Event log, maximum 100 records. When the maximum limit I. |
| Connectivity | RS485 serial port – Remote monitoring and control. USB-C port – Retrieve log files and firmware upgrading. |
| GLP | yes |
| Calibration Timeout Reminder | yes |
| Analog Output | up to 4 based on configuration ordered |
| Display | Graphic LCD, 128 x 64 pixel B/W with backlight |
| Power Supply | 100 – 240 Vac ±10%; 50/60 Hz; 15VA; fuse protected (2A, 250V slow blow fuse) |
| Environment | -20 to 50 ºC (-4 to 122 ºF); maximum 100% RH non-condensing |
| IP Rating | IP65 |
| Dimensions | Width 144.0 mm (5.7 in.) x Height 144.0 mm (5.7 in.) x Depth 151.3 mm (6.0”) |
| Weight | Approximately 1.6 kg (3.5 lb.) |
| Notes | *For a water tight seal, tighten the front four screws on the front casing to 13.3 lbf·in (1.5 N·m, maximum 2.0 N·m), of torque. |
| Name | Universal Process Controller – HI510-0320 – controller with 3 relays and 2 analog outputs |
| Dosing Control | on/off, proportional and PID |
| Dosing Terminals | Up to 5 relays (independently configurable for process variables, Hold & Cleaning functions) Electromechanical relay SPDT and SPST contact outputs. 5A – 250 Vac; 5A – 30 Vdc (resistive load). Fuse protected: 5A, 250V slow blow fuse. |
| Alarm Relay Set Point | Up to 5 relays (independently configurable for process variables, Hold & Cleaning functions)Electromechanical relay SPDT and SPST contact outputs. 5A – 250 Vac; 5A – 30 Vdc (resistive load). Fuse protected: 5A, 250V slow blow fuse. |
| Over Dosing Control | yes |
| System Error | yes |
| Analog Ouput Signal | 2 or 4 independent, galvanically isolated outputs | 0 – 22 mA configurable as: 0 – 20 mA; 4 – 20 mA 22 mA as alarm signal, configurable option |
| Analog Ouput Accuracy | ±2% full scale |
| Digital Input Signal | independent, galvanically isolated inputs (configurable for Hold & Cleaning functions) On state: 5 to 24 Vdc, low or high level active |
| Digital Output Signal | RS485 |
| Backlight | yes |
| Power Consumption | 15VA |
| Enclosure | *Single case ½ DIN, type NEMA4X, IP65 ingress protection |
| Installation Category | II |
| Panel Cutout | 1/2 DIN (brackets ordered seperately) |
| Input Channels | one digital input with RS485 interface |
| pH Electrode | HI10X6 series – pH and Temperature (ordered seperately) |
| ORP Electrode | HI20X4 series – ORP and Temperature (ordered seperately) |
| Logging Type | Interval log, up to 100 files, maximum 8600 records on each stored file. When the maximum limit of 100 stored files is reached, the most recent file will automatically erase the oldest one. Event log, maximum 100 records. When the maximum limit I. |
| Connectivity | RS485 serial port – Remote monitoring and control. USB-C port – Retrieve log files and firmware upgrading. |
| GLP | yes |
| Calibration Timeout Reminder | yes |
| Analog Output | up to 4 based on configuration ordered |
| Display | Graphic LCD, 128 x 64 pixel B/W with backlight |
| Power Supply | 100 – 240 Vac ±10%; 50/60 Hz; 15VA; fuse protected (2A, 250V slow blow fuse) |
| Environment | -20 to 50 ºC (-4 to 122 ºF); maximum 100% RH non-condensing |
| IP Rating | IP65 |
| Dimensions | Width 144.0 mm (5.7 in.) x Height 144.0 mm (5.7 in.) x Depth 151.3 mm (6.0”) |
| Weight | Approximately 1.6 kg (3.5 lb.) |
| Notes | *For a water tight seal, tighten the front four screws on the front casing to 13.3 lbf·in (1.5 N·m, maximum 2.0 N·m), of torque. |
