Gossen Metrawatt M505D Offers

Test System for EN 60204-1 (VDE 0113-1), EN 61439-1 (VDE 0660-600-1)

The PROFITEST 204+ tester has been designed for quick, safe testing of electrical and electronic equipment and systems at machinery in accordance with DIN EN 60204-1 and VDE 0113-1 with nominal voltages of up to 1000V.

The following periodic tests must be performed in accordance with the standard:

• Testing for continuity at connections within the protective conductor system with 10A test current
• Insulation resistance test
• Voltage tests (optionally HP or HV)
• Testing for residual voltage

Beyond this, the following tests and measurements may be performed as well:

• Leakage current test
• Voltage measurement
• Frequency measurement

With this instrument, you can measure the values indicated above for the preparation of an acceptance test report. For loop impedance measurement, we recommend PROFITEST C, 2 or an instrument from the PROFITEST MASTER series.

Display:The LCD window consists of an illuminated dot matrix display at which menus, device settings and measurement results, as well as online help can be displayed.

Help Key:Information regarding the current menu item can be queried with this key. Online help texts appears at the LCD window.

Function Selector Switch:Testing, report generating and data management functions are selected with the rotary switch.

Limit Values:Limit values can be assigned for use with each measurement, allowing for individualized adaptation of the various tests to prevailing local conditions, as well as to the latest requirements set forth in the standards.

Data Memory:Depending upon the number of systems for which data logging is performed (max. 254), up to 2800 measurements can be saved to memory.

Remote Control:The test probe with integrated control panel allows for remote control of protective conductor and insulation resistance measurements, as well as storage of the respective values to memory. Integrated lamps indicate measurement progress status. All PROFITEST 204+ operating functions can also be controlled via the RS 232 interface. Signal and display values can be remote queried as well.

RS 232 Interface for Input Module and PC:This port provides for data transmission and the supply of electrical power to the optionally available SECUTEST SI+ input module. Other devices (e.g. a PC) can also be connected to this port with the help of an interface cable.

CENTRONICS Parallel Port:Any commercially available printer can be connected to this data interface (except for PostScript printers). Detailed report forms which have been uploaded to the instrument can be read out via this port.

Report Generating Options:Up-to-date PC software (free starter program or demo software for data management, as well as report and list generation) can be downloaded from our website.

Features

• Clear-cut operating menus
• Illuminated display
• Two 4 m measurement cables (4-wire connection)
• Remote control for efficient use
• Limit value adjustment
• Convenient memory and report generating functions
• Data interfaces for PC and printer
• Can be expanded for quick, on-site alphanumeric data entry and reports printing
• Protective Conductor Test with test current 10A
• Can be retrofitted for high-voltage testing
• MetraMachine 439/5,4 Extensions and L/GB

Applications

Ideal for the following applications: Quick, Safe Testing of Electrical and Electronic Equipment and Systems for Machinery.