- Sign In
- |
- Sign Up
- |
- My Quote (0)
- |
- CART (0)
When both the transition junction and the lead wires are required to withstand temperatures covering the entire operating range of the probe, choose this full-immersion PRT.
When both the transition junction and the lead wires are required to withstand temperatures covering the entire operating range of the probe, choose this full-immersion PRT.
This full-immersion PRT has a calibration accuracy of ±0.05°C.
Features
| Temperature Range | -328 to 320°F (-200 to 160°C) |
| Nominal Resistance At 0.01°C | 100Ω ±0.1Ω |
| Temperature Coefficient | 0.00385Ω/Ω/°C |
| Accuracy | ±0.04 at 0.01°C; ±0.06 at 160°C |
| Short-Term Repeatability | ±0.03 at 0.01°C; ±0.04 at 160°C |
| Drift | ±0.03 at 0.01°C; ±0.04 at 160°C |
| Hysteresis | ±0.015°C |
| Sheath Length | 1.97in ±0.2in (50mm ±5mm) |
| Sheath Diameter | 0.13in ±0.004in (3.1mm ±0.1mm) |
| Sheath Material | 316 SST |
| Transition Junction Temperature Range | -328 to 320°F (-200 to 160°C) |
| Sensor Length | 1.2in ±0.1 in (30mm ±3mm) |
| Sensor Location | 1.2in ±0.04in (3mm ±1mm from tip) |
| Minimum Insulation Resistance | 20MΩ at 23°C |
| Minimum Immersion Length | Full immersion |
| Maximum Immersion Depth In Liquid Medium | Full immersion |
| Maximum Immersion Depth In Dry Medium | Full immersion |
| Response Time | 12 seconds typical |
| Self Heating (In 0°C Bath) | ±0.003°C |
| Lead-Wire Cable Type | Enameled copper wire |
| Lead-Wire Length | 8ft (2.4m) |
| Lead-Wire Temperature Range | 320°F (160°C) |
| Calibration | Calibration not included. NVLAP accredited calibration available. See ordering information |
Click on a category to view a selection of compatible accessories with the Fluke 5606-50-S Full-Immersion PRT with Spade Lugs.
| Temperature Range | -328 to 320°F (-200 to 160°C) |
| Nominal Resistance At 0.01°C | 100Ω ±0.1Ω |
| Temperature Coefficient | 0.00385Ω/Ω/°C |
| Accuracy | ±0.04 at 0.01°C; ±0.06 at 160°C |
| Short-Term Repeatability | ±0.03 at 0.01°C; ±0.04 at 160°C |
| Drift | ±0.03 at 0.01°C; ±0.04 at 160°C |
| Hysteresis | ±0.015°C |
| Sheath Length | 1.97in ±0.2in (50mm ±5mm) |
| Sheath Diameter | 0.13in ±0.004in (3.1mm ±0.1mm) |
| Sheath Material | 316 SST |
| Transition Junction Temperature Range | -328 to 320°F (-200 to 160°C) |
| Sensor Length | 1.2in ±0.1 in (30mm ±3mm) |
| Sensor Location | 1.2in ±0.04in (3mm ±1mm from tip) |
| Minimum Insulation Resistance | 20MΩ at 23°C |
| Minimum Immersion Length | Full immersion |
| Maximum Immersion Depth In Liquid Medium | Full immersion |
| Maximum Immersion Depth In Dry Medium | Full immersion |
| Response Time | 12 seconds typical |
| Self Heating (In 0°C Bath) | ±0.003°C |
| Lead-Wire Cable Type | Enameled copper wire |
| Lead-Wire Length | 8ft (2.4m) |
| Lead-Wire Temperature Range | 320°F (160°C) |
| Calibration | Calibration not included. NVLAP accredited calibration available. See ordering information |
Click on a category to view a selection of compatible accessories with the Fluke 5606-50-S Full-Immersion PRT with Spade Lugs.
