FLIR FC617R30hz Offers

When the object surface temperature reaches pre-set upper thresholds, the FC-Series AI-R continuously monitors for temperature changes or hot spots in areas prone to fire risks, such as storage containers, warehouses, combustible piles, landfills, and waste bunkers. Upon detecting a hot spot or significant temperature change, the camera promptly sends an alarm to the Video Management System (VMS) for immediate assessment and swift deployment of response tactics. Integrating Deep Neural Network and motion analytics, with a thermal sensitivity of <35 mK NETD, the FC-Series AI-R offers enhanced situational awareness and clear image quality, making it a versatile tool for perimeter security and physical asset safety.

Contactless hot spot detection

• Process temperature differences in real-time to identify risks of overheating ​
• Monitor relative temperature changes to detect failing components
• Measure surface temperatures with an accuracy of 41°F (±5°C) for targets below 302°F (150°C) and send alarms when pre-set thresholds are exceeded
• Uses a 640 x 512 resolution uncooled VOx micro-bolometer sensor (17 µm pitch) covering wavelengths ~7.5 to 13.5 µm
• Thermal sensitivity is < 35 mK NETD (for f/1.0) at 77°F (25°C) ambient

Industry-leading thermal imaging​

• Crisp images from premium thermal sensor for rapid visual verification of hot spots using isotherm specific color palettes to differentiate pixels from coldest to warmest detected object surface temperatures​
• Video with 640 x 512 full resolution allows to view images, thermal patterns, and contrast despite smoke, low light, light fog, and haze
• FLIR’s custom AGCs provide images with extremely high contrast​
• Dynamic Detail Enhancement (DDE) creates sharp edges and contrast that improve analytics performance​

Intelligent alarms and easy integration

• Set temperature thresholds to be notified in real-time when an object’s surface temperature breaches the upper values
• Reduce false radiometric alarms by combining thermal hot-spot detection with intelligent vehicle detection, to filter out alarms from hot vehicle exhaust pipes in monitored areas
• Seamlessly integrate with FLIR UVMS, as well as with other major third-party video management systems, through the FLIR Nexus® software development kit
• FLIR NEXUS® on-board enables target geolocation for situational awareness, and precise hand-off to a pan-tilt-zoom device

Applications

• Perimeter and facility security
• Use the thermal + analytics combo to detect intruders at fences, site boundaries, plant perimeters, critical installations (power stations, substations, water treatment)
• Remote/unlit areas
• In places with no lighting (e.g. remote compounds, deserts, rural sites), thermal cameras excel where visible-light cameras struggle
• Early fire/hot spot detection
• Monitoring for unusually high temperatures on structures, equipment, panels, or in high-risk zones (e.g. storage yards for combustible materials). The radiometric function is key here
• Infrastructure/utility monitoring
• Overhead lines, transformer sites, pipeline stations - where thermal anomalies can indicate failures or trespass
• Industrial/process monitoring
• In factories, plants, or process flows, it can watch for overheating machinery or hot surfaces that may signal faults or risk
• Mixed use security + condition monitoring
• In complex sites where you want a camera to do both intrusion detection and monitor thermal health of equipment
• Harsh or adverse environments
• Areas with heavy dust, smoke, fog, or poor lighting: Thermal may perform better than visible optics under these conditions