- Sign In
- |
- Sign Up
- |
- My Quote (0)
- |
- CART (0)
Provide the industry standard 3.33 mV/V signal designed to work with most pressure indicators. It features a ½ to 20 UNF thread for installation in standard transducer mounting holes and can be supplied with a variety of electrical connections. The transducer is ideal for abrasive and/or corrosive melt-pressure applications requiring simple installation, repeatability, and reliability.
Provide the industry standard 3.33 mV/V signal designed to work with most pressure indicators. It features a ½ to 20 UNF thread for installation in standard transducer mounting holes and can be supplied with a variety of electrical connections. The transducer is ideal for abrasive and/or corrosive melt-pressure applications requiring simple installation, repeatability, and reliability.
The abrasive and corrosive melt pressure transducer has an accuracy better than ±1%.
Features
Applications
| Pressure Range | 1,000 to 30,000 psi |
| Transducer Configuration | Rigid stem with flexible capillary |
| Snout Length | 6" (15 cm) |
| Snout Length | 18" (46 cm) Flex |
| Combined Error | ±1% FSO, (Including Linearity, Repeatability & Hysteresis) |
| Repeatability | ±0.2% FSO |
| Maximum Pressure | 2 x full range or 35,000 psi (whichever is less) |
| Configuration | Four active arm bonded Wheatstone bridge strain gage |
| Bridge Resistance | Input: 345 Ohms minimum; Output: 350 Ohms ±10% |
| Output | 3.33 mV/V ±2.0% |
| Zero Balance | ±10% full scale |
| Input Voltage | 10 Vdc recommended, 12 Vdc maximum |
| Internal Shunt Calibration (R-Cal) | 80% FSO ±1.0% |
| Insulation Resistance | 1,000 megohms at 50 Vdc |
| Maximum Diaphragm Temperature | 750°F (400°C) |
| Standard Wetted Parts | Inconel 718 |
| Pressure Range | 1,000 to 30,000 psi |
| Transducer Configuration | Rigid stem with flexible capillary |
| Snout Length | 6" (15 cm) |
| Snout Length | 18" (46 cm) Flex |
| Combined Error | ±1% FSO, (Including Linearity, Repeatability & Hysteresis) |
| Repeatability | ±0.2% FSO |
| Maximum Pressure | 2 x full range or 35,000 psi (whichever is less) |
| Configuration | Four active arm bonded Wheatstone bridge strain gage |
| Bridge Resistance | Input: 345 Ohms minimum; Output: 350 Ohms ±10% |
| Output | 3.33 mV/V ±2.0% |
| Zero Balance | ±10% full scale |
| Input Voltage | 10 Vdc recommended, 12 Vdc maximum |
| Internal Shunt Calibration (R-Cal) | 80% FSO ±1.0% |
| Insulation Resistance | 1,000 megohms at 50 Vdc |
| Maximum Diaphragm Temperature | 750°F (400°C) |
| Standard Wetted Parts | Inconel 718 |
