Branson Ultrasonics CPX8800H Offers

Features

• Sweep frequency eliminates standing waves and creates consistent cavitation throughout the tank
• 40 kHz rugged industrial transducers
• 99-minute digital timer and continuous ultrasonic operation
• Can be heated up to 156.2°F (69°C) and set for either Fahrenheit or Celsius
• Last stored parameters are recalled when unit is turned back on
• Constant activity/power tracking
• Degassing and conditioning the solution
• Programmable
• Automatic ultrasonic activation
• High/low power control
• Sleep mode
• High-temperature safety alarm indicator for protection from unit overheating
• Temperature calibration is user accessible through front panel
• Controls are located above and behind the cleaning tank in an easily accessible control tower panel, and raised above the tank to avoid damage from cleaning solutions
• Tank drains with valves
• Plastic body, chemical-resistant

Constant activity/power tracking

Automatically maintains the ultrasonic power by adjusting for changes in liquid level and temperature caused by a light or heavy load. This helps ensure more uniform cleaning and consistent performance, even with multiple users or when bath conditions change.

Degassing and conditioning the solution

The degassing period can be set up to 99 minutes. Extended degas time periods allow for "beyond cleaning" applications such as sample preparation, which includes degassing liquids, mixing and homogenization, dissolving solids, cell lysing, and dispersion of particles.

Programmable

This bath is completely programmable. Once the process is entered into the controller, the end user only has to start the program and they are free to leave the unit on its own to do the job. The programmable process allows the process engineer to choose the temperature set point at which the degassing and ultrasonic time periods are triggered to begin. Once the CPXH ultrasonic run time period is reached, the unit shuts off, delivering the same results - every time.

Automatic ultrasonic activation

When the process temperature reaches the programmable set point, the ultrasonic cycle begins. This includes selectable times for both degas and ultrasonic processing.

High/low power control

When cleaning delicate parts, this bath allows the user to lower the amplitude of the acoustic energy in the bath: 100% power to the tank for normal applications, 70% power for delicate applications. Manipulating the output waveform in this manner greatly helps to avoid damage to the components in the bath during the ultrasonic process.

Sleep mode

An energy-saving green feature. When the cycle is complete and no control keys are touched for 15 minutes, it goes into sleep mode. Touching any key on the controller causes the unit to come back on.

Applications

• Laboratory