- Sign In
- |
- Sign Up
- |
- My Quote (0)
- |
- CART (0)
Turning motor load into a signal a controller can trend, this analog current sensor gives a proportional output across 0 to 50 A rather than the on-or-off a status switch reports. The solid core is threaded at installation and then holds its calibration. Field-selectable ranges cover more than one motor size from a single part number.
Turning motor load into a signal a controller can trend, this analog current sensor gives a proportional output across 0 to 50 A rather than the on-or-off a status switch reports. The solid core is threaded at installation and then holds its calibration. Field-selectable ranges cover more than one motor size from a single part number.
The 4 mA to 20 mA Output Analog Current Sensors are designed for use in any AC current monitoring application in which you are looking to monitor a particular piece of equipment. The "Average" style current sensors should be used in applications where the Sinusoidal waveform has no distortion or noise on the conductor being monitored. Applications may include monitoring a resistive type load such as an incandescent light bulb, heating element as well as any single speed linear load. Note that the "True RMS" sensors are able to be used in all applications since the "True RMS" current sensors provide the best overall accuracy and should be used in applications which includes Variable Frequency Drives, Switching Power Supplies, Computers and Data Centers, Electronic Ballasts, SCR's, and Variable Speed Loads.
Features
Applications
| Current Sensing Range | 0 to 50 A |
| Monitored Current Type | AC current |
| Accuracy | ±1% of the selected range |
| Output Signal | 4 to 20 mA |
| Isolation Voltage | 2200 V AC |
| Supply Current | 25 mA minimum |
| Supply Voltage | 8.5 V DC to 30 V DC, reverse-polarity protected |
| Aperture Size | 0.75" (19.05 mm) |
| Core Style | Solid |
| Wire Size | 0.823 mm2 to 0.205 mm2 (18 AWG to 24 AWG) copper |
| Wiring Connections | 2-position screw terminal block, polarity sensitive |
| Maximum AC Voltage | 600 V AC |
| Din Rail Size | 35 mm |
| Product Dimensions (L x W x H) | 2.95 x 3.25 x 1.00" (74.9 x 82.5 x 25.4 mm) |
| Product Weight | 0.18 lbs (84 g) |
| Current Sensing Range | 0 to 50 A |
| Monitored Current Type | AC current |
| Accuracy | ±1% of the selected range |
| Output Signal | 4 to 20 mA |
| Isolation Voltage | 2200 V AC |
| Supply Current | 25 mA minimum |
| Supply Voltage | 8.5 V DC to 30 V DC, reverse-polarity protected |
| Aperture Size | 0.75" (19.05 mm) |
| Core Style | Solid |
| Wire Size | 0.823 mm2 to 0.205 mm2 (18 AWG to 24 AWG) copper |
| Wiring Connections | 2-position screw terminal block, polarity sensitive |
| Maximum AC Voltage | 600 V AC |
| Din Rail Size | 35 mm |
| Product Dimensions (L x W x H) | 2.95 x 3.25 x 1.00" (74.9 x 82.5 x 25.4 mm) |
| Product Weight | 0.18 lbs (84 g) |
