Search within this category
- Sign In
- |
- Sign Up
- |
- My Quote (0)
- |
- CART (0)
Search within this category
Search within this category
The direct reading scales eliminate troublesome conversions. The scales are brushed aluminum, coated with epoxy and the graduations are on both sides of the indicating tube. Special integral flow guides stabilize the float throughout the range to keep it from hunting or wandering in the bore. The float is highly visible against a white background.
Quickly indicates low air or non-corrosive gas pressures either positive, negative (vacuum) or differential. The design resists shock, vibration and over-pressures. No manometer fluid to evaporate, freeze or cause toxic or leveling problems. May be used with Hydrogen; order a Buna-N diaphragm, pressures must be less than 35 psi.
This compact gauge is easy to read and can safely operate at total pressures up to 30 psig. Standard pressure connections are barbed fittings for 3/16" ID tubing; optional 1/8" male NPT connections are also available. Over-pressure protection is built in by means of a blow-out membrane molded in conjunction with the diaphragm.
The 4-digit LCD can display readings in common English and metric units so conversions are not necessary. The simplified four button operation reduces set up time and simplifies calibration with its digital push button zero and span. All models are factory calibrated to specific ranges.
Designed to measure and control positive, negative, or differential pressures consisting of non-combustible and non-corrosive gases. The gauge reading is independent of switch operation, and switching status is visible by LED indicators located on the front and rear of the gauge. Setpoints are adjusted with push buttons on the back of the unit.
This product requires further configuration for pricing
This product requires further configuration for pricing
