- Sign In
- |
- Sign Up
- |
- My Quote (0)
- |
- CART (0)
Power on
Power on
Portable appliance tester for testing the safety of portable electrical equipment to meet health and safety regulations. The fully featured tester with dedicated test buttons for direct access to tests. Designed for customers who do not require the complexity of a fully configurable database of clients and results within the tester but do need a complete range of functions to allow automatic or manual testing of the widest range of electrical assets. Simply push-button operation makes this tester fast and intuitive to use.
Portable appliance tester for testing the safety of portable electrical equipment to meet health and safety regulations. The fully featured tester with dedicated test buttons for direct access to tests. Designed for customers who do not require the complexity of a fully configurable database of clients and results within the tester but do need a complete range of functions to allow automatic or manual testing of the widest range of electrical assets. Simply push-button operation makes this tester fast and intuitive to use.
The PAT350 has additional flash test functions and is the ideal tester for high throughput requirements if you work in a tool hire company or a service center.
Features
Applications
High current bond testing and flash-test capability for use in environments such as manufacturing, production or tool-hire shops.
All regulatory test requirements are supported, including Class I and Class II, IEC power leads, extension leads and full tests for portable RCDs. An automatic mode is available for class I and Class II testing. In automatic mode, the tests proceed sequentially through bond, insulation and operation, indicating a pass or fail at each test. If a fail occurs, testing is stopped. When manual testing, each test is preceded by a selection screen where the test parameters are selected, such as bond test current, insulation test voltage or leakage test type. These diagnostic buttons provide direct access to any test individually, allowing single tests to be performed following repair or a suspect result.
| Open Circuit Voltage | |
| 10 A Bond Test Current | 10 A rms ±20% ± 0.5A into 0.1 Ω |
| Earth Bond Resistance Accuracy | ±5% ±3 digits (0 to 0.49 Ω), ±5% ±5 digits 0.5 to .99 Ω) |
| Earth Bond Resistance Resolution | 10 mΩ (0 to 1.99 Ω) |
| Display Range | 0 to 1.99 Ω |
| Bond Test Nulling | Up to 1.00 Ω |
| Adjustable Test Duration | User selectable from 1 sec to 20 sec |
| Continuity Test Voltage | 4.0 V d.c. -0% +10% (open circuit) |
| Continuity Test Current | 200 mA -0% +10% ±5 mA (into 2 Ω load) |
| Continuity Resistance Accuracy | ±5% ±3 digits (0 to 0.49 Ω), ±5% ±5 digits 0.5 to .99 Ω) |
| Continuity Resistance Resolution | 10 mΩ (1 to 19.99 Ω) |
| Continuity Test Nulling | up to up to 9.99 Ω |
| Test Voltage | 3.3 V |
| Operating Temperature | 10 to +50 ºC |
| Storage Temperature | -20 to +60 ºC |
| Weight | 5.0 kg |
| Dimensions | 175 mm (H) x 320 mm (D) x 250 mm (W) |
| Open Circuit Voltage | |
| 10 A Bond Test Current | 10 A rms ±20% ± 0.5A into 0.1 Ω |
| Earth Bond Resistance Accuracy | ±5% ±3 digits (0 to 0.49 Ω), ±5% ±5 digits 0.5 to .99 Ω) |
| Earth Bond Resistance Resolution | 10 mΩ (0 to 1.99 Ω) |
| Display Range | 0 to 1.99 Ω |
| Bond Test Nulling | Up to 1.00 Ω |
| Adjustable Test Duration | User selectable from 1 sec to 20 sec |
| Continuity Test Voltage | 4.0 V d.c. -0% +10% (open circuit) |
| Continuity Test Current | 200 mA -0% +10% ±5 mA (into 2 Ω load) |
| Continuity Resistance Accuracy | ±5% ±3 digits (0 to 0.49 Ω), ±5% ±5 digits 0.5 to .99 Ω) |
| Continuity Resistance Resolution | 10 mΩ (1 to 19.99 Ω) |
| Continuity Test Nulling | up to up to 9.99 Ω |
| Test Voltage | 3.3 V |
| Operating Temperature | 10 to +50 ºC |
| Storage Temperature | -20 to +60 ºC |
| Weight | 5.0 kg |
| Dimensions | 175 mm (H) x 320 mm (D) x 250 mm (W) |
