ISA CBA 1000 & PII15166 Offers

CBA 1000 is a powerful timing and motion analyzer test set. It is a stand alone unit with a large graphical display. The unit is supplied with TDMS analysis software. TDMS performs test results analysis and creates test reports; it allows also to pre-define test plans.

All CBA 1000 circuits have been designed to ensure safe and reliable operations in the noisy environment of HV / MV substations and power plants.

Features

• Circuit Breaker timing test set suitable for EHV, HV and MV circuit breakers
• 6 main and 6 resistive contact inputs
• 7 analog inputs
• 4 auxiliary timing contact
• Cross trigger for the synchronization of up to 4 CBA 1000
• Stand alone functionality - no PC connection is required
• Analysis and result evaluation directly on the display
• Internal memory for up to 250 test results and 64 pre-defined test plans
• USB and RS232 ports

Available Built-In Modules

• ISA PII83170 IEC 61850-8 Protocol Interface
  Expands the testing capabilities of the DRTS when used with the TDMS software by handling IEC61850 (GOOSE) messages. Required for relay testing with Ethernet-based substation communication protocol.
• ISA PII89170 IEC 61850-9-2 Protocol Interface
  The IEC 61850-9-2 option allows to generate measurement messages and inject Sampled Values on the system bus. The connection is performed via an optical fiber connector, mounted on the rear of the test set. Requires the PII87170 IRIG-B Connection Module.
• ISA PII82170 Transcope Analog & Digital Recorder with Measurement Function
  Enables measurement and recording functions in the DRTS Systems. This module allows to record phase angle, frequency, sequence of events, fault recording and up to 10 voltages or currents with an accuracy of ±0.06%.
• ISA PII87170 IRIG-B Connection and Output Extension Module
  Enables connection with AMI 332 and AMI 632 External Amplifiers, PII88170 Internal GPS Synchronizer, and PII89170 IEC 61850-9-2 Protocol Interface.
• ISA PII88170 Internal GPS Synchronizer
  Allows to synchronize the test start of two DRTS Test Sets. It features a maximum timing error of ±1µs and includes an antenna and a 20m extension cable for the antenna. Requires the PII87170 IRIG-B Connection Module.