Home Liquidation Seminars Calibration Rentals Shipping About Us Contact Us

805
805
FLUKE VIBRATION METER
  • Provides repeatable, severity-scaled readings of overall vibration and bearing condition
  • Overall vibration measurement (10 Hz to 1,000 Hz) for acceleration, velocity and displacement units of measurement
  • Availability: In Stock
    Your Price: $1,899.00
    Your Total Price: $1,899.00

     Additional Information
     

  • Innovative sensor design minimizes measurement variations caused by device angle or contact pressure
  • Consistent data quality at both low and high frequency ranges
  • Four-level severity scale assesses urgency of problems for overall vibration and bearing condition
  • Exportable data via USB
  • Trending in Microsoft® Excel using built-in templates
  • Units of measurement: Acceleration: g, m/sec2; Velocity: in/sec, mm/sec; Displacement: mils, mm
  • Crest Factor+ technology provides reliable bearing assessment using direct sensor tip measurements between 4,000 Hz and 20,000 Hz
  • Coloured lighting system (green, red) and on-screen comments indicate how much pressure needs to be applied to take measurements
  • Temperature measurement with Spot IR Sensor increases diagnostic capabilities
  • On-board memory holds and saves up to 3,500 measurements
  • Audio output for listening to bearing tones directly
  • External accelerometer support for hard to reach locations
  • Flashlight for viewing measurement locations in dark areas
  • Large screen with high resolution for easy navigation and viewing

    Specifications:
    Functional Specifications
    Vibration Meter
    Low Frequency Range: 10 Hz to 1,000 Hz
    High Frequency Range: 4,000 Hz to 20,000 Hz
    Severity Levels: Good, Satisfactory, Unsatisfactory, Unacceptable
    Vibration Limit: 50 g peak (100 g peak-peak)
    A/D Converter: 16-bit
    Signal to Noise Ratio: 80 dB
    Sampling Rate: Low frequency: 20,000 Hz; High frequency: 80,000 Hz

    Sensor:
    Sensitivity: 100 mV/g ± 10%
    Measurement Range: 0.01 g to 50 g
    Low Frequency Range: 10 Hz to 1,000 Hz
    High Frequency Range: 4,000 Hz to 20,000 Hz
    Resolution: 0.01 g
    Accuracy: At 100 Hz ± 5% of measured value

    Infrared Thermometer
    Temperature Range: -20 to 200°C (-4 to 392°F)
    Accuracy: ±2°C (4°F)
    Focal Length: Fixed, at ~3.8 cm (1.5")

    General Specifications
    External Interfaces: USB 2.0 (full speed) communication
    Data Capacity: Database on internal flash memory
    Memory: Up to 3,500 measurements
    Connectors: USB mini-B 7-pin, stereo audio output jack (3.5 mm audio plug), external sensor jack (SMB connector)
    Power Supply: AA (2) alkaline or lithium-ion 2VDC
    Battery Life: 250 measurements
    Dimensions: 257 x 162 x 98mm (10.1 x 6.4 x 3.875")
    Weight: 1.16 kg (2.55 lb)

  •  Larger Image - Click Below
     
     

     Extended Datasheet
     
    Line Item Add
    Item Number:
    QTY:
    Home Liquidation Seminars Calibration Rentals Shipping About Us Contact Us
    Links
    Careers
    Engineering Resources
    Join the conversation!
      

    ITM Instruments Inc.©
    Phone - 1-800-561-8187 · Fax - 1-800-361-1152

    information@itm.com

    Français
    Privacy Policy
    Shows & Events
    Analytics