The CI unit's onboard electronics are protected by a rugged NEMA 4 (IP65) stainless steel housing, allowing the sensor to function in ambient temperatures to 160°F (70°C) without cooling. The CI is wired in the same way as a thermocouple, so it can be used with most type J thermocouple temperature controllers. Since it provides a thermocouple output and has the same impedance as a thermocouple, it can be used to replace thermocouple where contact with the target can lead to breakage. Can be used in the following applications: blow molding, bonding, coating, converting, curing, drying, embossing, extrusion, forming, heating, laminating, molding, ovens, paint drying, paving, printing, and thermoforming.
Specifications:
Functional Specifications
Output: Type J Thermocouple.
Temperature Range: 32 to 662°F (0 to 350°C).
Optical Spot Ratio (Focal Point): 4: 1 (3" spot size @ 12").
Accuracy: 0°C to 115°C (32°F to 240°F) ±3°C (±6°F)
Repeatability: ±1% of measured value or ±2°F (1°C), whichever is greater.
Temperature Resolution: ±1°F (0.5°C).
Response Time: 350 ms (95%).
Emissivity: Fixed at 0.95.
Spectral Response: 7.6 to 18 µm.
Cable: 1m (3.3") Type J Thermocouple Wire; withstands up to 220°F (105°C).
Output Impedance: 50 ohms.
Minimum Load Impedance: 50K ohms.
General Specifications
Power Requirement: 12-24VDC (<= 2.5% ripple) @ 20mA.
Housing: NEMA 4 (IP65) Rated Stainless Steel Body.
Shock: IEC 68-2-27 (MIL STD 810D), 50 g's, 11 ms, any axis.
Vibration: IEC 68-2-27 (MIL STD 810D), 3 g's, 11-200 Hz, any axis.
Weight: 4.5 oz (130 g).
|
