Differential Pressure Transmitters
Sense and signal the difference in pressure between 2 ports.
Provides for both visual monitoring and electronic control of very low differential pressure. The 605 Series is ideal for control applications in building HVAC systems where local indication is desired during routine maintenance checks or necessary when trouble shooting the system.
Monitors differential pressure of air and compatible gases and liquids with 0.5% accuracy. The design employs dual pressure sensors converting pressure changes into a standard 4-20 mA output signal for two wire circuits. Small internal volume and minimum moving parts result in exceptional response and reliability.
Positive, negative and differential pressures can be measured within a full span accuracy of ±0.25. Units are enclosed in a polycarbonate case, rated NEMA 4X (IP66) and operate by sensing the pressure of air and compatible gases then sending a standard 4-20 mA output signal. Design enables operation in 2-wire current loops
Can be used for measuring pressures of liquids, gases & vapors. All available ranges have 0.5% F.S. accuracy with a 4-20 mA Output standard or optional 1-5V DC output. The NEMA 4 housing is an all 316 welded construction that is designed to withstand the harshest environmental conditions and is compatible with most media.
Monitor differential pressure in air/liquid flow systems, HVAC automation, pneumatic systems and process control with the Series 647 Wet/Wet Differential Pressure Transmitter. Units are temperature compensated and provide a 4 to 20 mA output signal.
Capable of measuring low pressures with a ±1% accuracy - ideally suited for proper building pressurization and air flow control. Can withstand up to 10 psig overpressure with no damage to the unit. Variable capacitance sensor design provides excellent sensitivity and long-term stability. Units also feature reverse-polarity protection.
Senses the pressure of air and compatible gases and sends a standard 4-20 mA output signal. The DM-2000 housing is specifically designed to mount in the same diameter cutout as a standard Magnehelic gauge. A wide range of models are available factory calibrated to specific ranges.
Provides a 4-20 mA process output, a robust NEMA 4X enclosure, plus a large LCD display that can be programmed to read in pressure, velocity or flow. Features security level, English or Metric engineering units, pressure, velocity or flow operation, K-factor, volumetric flow operation, plus many more.
Designed to measure pressures as low as 0.1"w.c. with ±0.4% accuracy. The transmitter features 15 psid overpressure, reverse polarity protection and EMI/RFI protection. The NEMA 4 housing allows for versatile mounting locations and integral mounting tabs simplify installation.
With a single digital push button, both zero and span are calibrated properly, nothing else is required.
Ashcroft RX7MB242ST10IW Pressure Transmitter with 10.00 Unidirectional Pressure Range
Ashcroft RX7MB242ST10IWL Pressure Transmitter with ±10.00 Bidirectional Pressure Range
Ashcroft RX7MB242ST1IW Pressure Transmitter with 1.00 Unidirectional Pressure Range
Ashcroft RX7MB242ST1IWL Pressure Transmitter with ±1.00 Bidirectional Pressure Range
Ashcroft RX7MB242ST25IW Pressure Transmitter with 25.00 Unidirectional Pressure Range
Ashcroft RX7MB242ST2IW Pressure Transmitter with 2.00 Unidirectional Pressure Range
Ashcroft RX7MB242ST2IWL Pressure Transmitter with ±2.00 Bidirectional Pressure Range
Ashcroft RX7MB242ST2P5IWL Pressure Transmitter with ±0.50 Bidirectional Pressure Range
Ashcroft RX7MB242ST3IW Pressure Transmitter with 3.00 Unidirectional Pressure Range
Ashcroft RX7MB242ST3IWL Pressure Transmitter with ±3.00 Bidirectional Pressure Range